3DXTech 3DXTech FibreX Black PA6+GF30 - 2.85mm (0.75kg)

FibreX PA+GF30 Glass Fiber Reinforced Nylon

Nylon+GF30 glass fiber reinforced Nylon 6 Copolymer (PA6) is nothing less than an industrial-grade beast! Formulated to be exceptionally stiff and strong, all without being brittle. Polyamides (PA) are the work horse of the plastics industry the world over thanks to their excellent mechanical, chemical, and thermal resistance. The addition of heavy glass fiber reinforcement takes it to the next level.

Benefits of Nylon+GF30 Include:

• Printable on practically any 3D printer with a heated bed
• Ideal for structural engineering-grade applications
• Exceptionally stiff and strong, without being brittle
• Excellent chemical resistance makes it suitable for automotive and industrial applications
• Resists fuels, lubricants, heat, and mechanical loading
• High thermal properties keep it strong up to 170°C in use, depending on printing and mechanical loads applied
• Glass fiber reinforcement improves dimensional stability, reduces shrinkage, lift, and warp
• Very strong layer bonding

Recommended Print Settings

• Extruder: 260-280°C
• Bed Temp: 60-75°C
• Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm
• Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.25mm with glass fiber-reinforced filaments
• Bed Prep: Magigoo Bed Prep
• Heated Chamber: Not required, but a 30-80°C chamber does improve layer bonding and finished part mechanical properties
• Supports: AquaTek™ water soluble X1 USM Universal Support Material works ideal for complex parts.
• Drying Instructions: 90°C for 4 hours.

Glass Fiber Reinforced Filament