Bambu Lab Bambu Lab A1 Combo 3D Printer
The Bambu Lab A1 Combo offers multi-color FDM 3D printing with a spacious 256×256×256 mm build area and AMS lite capability. It prints up to 500mm/s, features one-click nozzle swapping, and provides consistent quality with active flow compensation and motor noise cancelling.
- Maximize your spacious 256256256mm build volume
- Swap nozzles swiftly for quick calibrations
- Accelerate printing with speeds up to 500mm/s
| List Price: | $3,198.00 (with add-ons) |
|---|---|
| Price: | $2,799.00 (with add-ons) |
| Availability: | Only 3 left in stock. |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
BAMBU LAB A1 COMBO
YOUR GATEWAY TO COLORFUL FDM 3D PRINTING
Experience the ultimate 3D printing powerhouse that is the Bambu Lab A1 Combo. Featuring auto-calibration, multi-color capabilities, and active flow compensation, the A1 delivers exceptional results effortlessly at an accessible price point. The intuitive interface and quick-swap nozzle ensure user-friendly operation while you enjoy fast printing speeds, quiet operation, and a spacious build area. Whether you're a beginner or pro, the A1 is your gateway to limitless creativity.
Key Features of the Bambu Lab A1 Combo 3D Printer:
- Spacious Build Volume: 256×256×256mm
- Multi-color 3D printing with AMS lite (included)
- Fast Print Speeds—up to 500mm/s
- Quality of life operation features
- (1-click nozzle swap, fully automated calibration, print monitoring, etc.)
- Consistent, reliable print quality with smart print compensation features
- Active Motor Noise Cancelling for quiet performance
USER-FRIENDLY AUTOMATION
No expertise required—the Bambu Lab A1 3D printer gets you easily 3D printing right out of the box from setup to print thanks to the following convenient automated features:
- Load/unload filament with one touch
- No paper required—accurate, hands-off automated Z-offset
- Tedious-free automated 49-point calibration bed leveling
KEEP OPERATIONS QUICK
Fast and efficient from start to finish, the Bambu Lab A1 3D printer not only boasts automated preparation, it also features CoreXY-comparable printing speeds and a quick-change hotend design, streamlining the entire 3D printing experience.
- One-click hotend design for fast, easy maintenance
- Fast print speeds nearly equivalent to CoreXY levels
- All-metal frame, bearings, and rails engineered to keep up with high-speed performance
ACCESSIBLE MULTI-COLOR CREATIVITY
Jump into the world of multi-color FDM 3D printing without breaking the bank using the Bambu Lab A1 Combo. This system, featuring the Bambu AMS Lite, offers up to 4-color printing with unparalleled ease. The perfectly designed synergy between the Bambu A1 and AMS Lite guarantees a streamlined entry into multi-color printing experience.
- Multi-color printing with AMS Lite
- Budget-friendly, affordable entry
- No technical tinkering required
SMART QUALITY CONTROL
The Bambu Lab A1 delivers fantastic print quality at high speeds thanks to intelligent features like Auto Vibration Calibration, Auto Pressure Advanced (PA) Calibration, and Auto Belt Tension. These innovations ensure optimal machine settings for superior prints every time.
- Auto Vibration Calibration uses toolhead and bed sensors to combat vibration from fast sprint speeds, preventing shaky print results
- Auto PA Calibration uses a smart algorithm to automatically adjust nozzle pressure during printing to avoid under or over-extrusion
- Auto Belt Tension checks if the belt is loose and will notify you if adjustment is needed
PEACE-OF-MIND PRINTING
Rest easy operating your Bambu A1 in your classroom, workspace, or office knowing it has the following features:
- Intuitive UI walks you through printing hurdles
- Active Motor Noise Canceling feature allows quiet operation under 48dB
- Desktop/Mobile app combined with camera allows for remote printer control and monitoring
- Built-in camera cover available for privacy
- LAN mode available as alternate option to cloud printing
WHY BUY FROM MATTERHACKERS
MatterHackers is where digital fabrication technology meets passion. When you shop here, feel confident knowing that the vast selection of machines, materials, accessories, and unique bundles we've curated in our catalog are guaranteed top-quality products backed by our team of experts.
Exceptional customer service, fast & free shipping on orders over $35, a 30-day return policy, and more make us the reliable go-to for professionals, educators, and hobbyists. At MatterHackers, we're more than just a retailer; we're your trusted partner in production and innovation.
- Diverse, expert-curated catalog
- Top-notch customer service
- Convenient fast & free shipping
- Training and Maintenance Services
- 30-day Returns
- Rewards Program on qualified purchases
What's Included with the Bambu Lab A1 Combo 3D Printer?
- 1 × Printer
- 1 × Stainless Steel Hotend
- 1 × Purge Wiper
- 1 × PTFE Tube
- 1 × Textured PEI Plate
- 1 × AMS Lite
- 1 × Spool Holder
- 1 × Filament Sample
- 1 × Accessory Box
What's Included in the Bundles?
In addition to the items listed above,
the bundles come with the following:
 |  |
| EDU Basics Bundle | Uptime Bundle |
| Get 1-hour of direct virtual access to an expert at MatterHackers and three PETG spools from the get-go. Includes: 1 × MatterHackers Launchpad1 3 × ThriftyMake PETG (1kg)2 | This bundle comes with the basic accessories needed to reduce any potential downtime that may strike. Have piece of mind knowing you have a spare hotend and plate on hand as well as an extended protection for your machine. Includes: 1 × Extended Warranty3 1 × FDM Essentials Tool Kit 1 × Dual-Texture PEI Plate 1 × Spare A1 Stainless Steel Hotend 3 × Spare A1 Silicone Socks |
 |  |
| RainPRO Bundle | EDU the Works Bundle |
| Try out MatterHackers' line of professional PLA filament in 6 different colors, at a discounted price. MatterHackers' PRO Series is known for its tight tolerances, enormous breadth of hues, and reliable color consistency. Includes: 6 x PRO Series PLA (1kg)2 | This comes with the accessories that keep downtime minimal. Affordable materials are also included so you can jump right into printing. 1-hour of direct virtual access to an expert at MatterHackers is available as well as extended protection for your machine. Includes: 1 × MatterHackers Launchpad1 1 × Extended Warranty3 1 × Bambu Smooth PEI Plate 1 × Bambu P1 Complete Hotend Assembly - Hardened Steel 0.4mm 4 × ThriftyMake PLA+ (1kg)2 |
 | |
| Dryer Solution | |
| Actively keep moisture away from filament using a dedicated dryer and storage containers. This is essential for successful printing with hygroscopic filaments like TPU, nylon, and PVA. Sometimes even old PETG and PLA filament need drying. Includes: 1 × Extended Warranty3 1 × SUNLU S4 Filament Dryer 1 × Storage Cases (Pack of 5) |
1 The purchase of MatterHackers Launchpad includes access to our exclusive launchpad service, available for 3 months after delivery, designed to assist you in getting started with your new machine.
2 Filament colors in product photo are not guaranteed upon order. Filament colors will depend on inventory availability at time of purchase.
3 MatterHackers offers an extended warranty for the Bambu Lab A1 Series of 3D printers which covers an additional warranty year on top of the one-year standard Bambu Lab warranty.
Which Bambu Lab 3D Printer Series is Right for Me?
See below for a brief summary/highlights across different Bambu Lab 3D printer series.
 |  |  |  |
| A1 Series | P1 Series | X1 Series | X1E |
| IDEAL USE CASE --- Affordable entry into 3D printing standard materials. | IDEAL USE CASE --- Print standard materials with optional capability to print some advanced materials. | IDEAL USE CASE --- Ideal for advanced and composite (i.e. NylonX, NylonG, etc.) materials right out of the box, as well as standard materials. | IDEAL USE CASE --- Superior 3D printing of composite and advanced materials right out of the box, as well as standard materials. Also, gain access to more control over printer's network security. |
| SPECIFIC FEATURES --- NOT Enclosed Nozzle Temp: 300°C Bed Temp: 80-100°C NO Active Heating NO Air Filter NO Micro Lidar NO Ethernet Low Rate Camera Touchscreen Interface Filament Inputs: Up to 4 (optional) | SPECIFIC FEATURES --- Enclosed (optional) Nozzle Temp: 300°C Bed Temp: 100°C NO Active Heating Carbon Air Filter NO Micro Lidar NO Ethernet Low Rate Camera Button Interface Filament Inputs: Up to 16 (optional) | SPECIFIC FEATURES --- Enclosed Nozzle Temp: 300°C Bed Temp: 120°C NO Active Heating Carbon Air Filter Bambu Micro Lidar NO Ethernet 1080p Camera Touchscreen Interface Filament Inputs: Up to 16 (optional) | SPECIFIC FEATURES --- Enclosed Nozzle Temp: 320°C Bed Temp: 120°C Active Heated Chamber Carbon & HEPA Filter Bambu Micro Lidar Ethernet Capable 1080p Camera Touchscreen Interface Filament Inputs: Up to 16 (optional) |
| AVAILABLE MODELS --- A1 / Combo A1 Mini / Combo | AVAILABLE MODELS --- P1P P1S / Combo | AVAILABLE MODELS --- X1 Carbon / Combo | AVAILABLE MODELS --- X1E |
Still undecided and have questions? Request a quote or contact support@matterhackers.com and we'll connect you with one of our MatterHackers Pro's who can help!
What are the Tech Specs of the Bambu Lab A1 Combo 3D Printer?
| GENERAL | |
|---|---|
| Machine Type | 3D Printer |
| Technology | Fused Deposition Modeling (FDM) / Fused Filament Fabrication (FFF) |
| Motion System | "i-3 style" Cartesian-XZ |
| Assembly | Fully Assembled |
| Made In | China |
| Printer Dimensions (W × D × H) | 465×410×430mm (18.3"×16.1"×16.9") |
| AMS Lite Dimensions (W × D × H) | 397×208×342mm (15.6"×18.19"×13.5") |
| Printer Weight | 8.3kg (18.3lbs) |
| AMS Lite Weight | 1.6kg (3.5 lbs) |
| PRINTER PARAMETERS | |
| Build Volume (W × D × H) | 256×256mm×256mm (10"×10"×10") |
| Filament Diameter | 1.75mm |
| Extrusion | Single |
| Extruder Type | Direct Drive |
| Filament Feeder Gear | Hardened Steel |
| Build Surface | Bambu Textured PEI Plate Optional Purchases Bambu Smooth PEI Plate Bambu Cool Plate Bambu High-Temperature Plate |
| Nozzle Material | Stainless Steel Hardened Steel (optional purchase) |
| Nozzle Size | 0.4mm Optional Purchases 0.2mm, 0.6mm, 0.8mm |
| Max Hotend Temperature | 300°C |
| Max Build Plate Temperature | 100°C |
| Max Speed of Toolhead | 500mm |
| Max Acceleration of Tool Head | 10,000mm/s² |
| Max Flow Rate | 28 mm³/s @ABS (Model: 150*150 mm single wall; Material: Bambu ABS; Temperature: 280 ℃) |
| PRINTER FEATURES | |
| Chassis | Steel + Extruded Aluminum |
| Magnetic Bed | ✓ |
| All-Metal Hotend | ✓ |
| Removable Hotend Assembly | ✓ |
| Multi-Color 3D Printing | with AMS Lite |
| Multi-Material 3D Printing | with AMS Lite |
| Filament Runout Sensor | ✓ |
| Filament Tangle Sensor | ✓ |
| Automatic Bed Leveling | ✓ |
| Filament Odometer | Yes |
| RFID Sensor | with AMS Lite |
| Active Vibration Compensation | ✓ |
| Flow Control | ✓ |
| Power Loss Recovery | ✓ |
| Belt Tensioner | ✓ |
| Closed Loop Fan | ✓ |
| Chamber Camera | ✓ |
| Adjustable Camera Cover | Yes; pre-installed |
| Camera Resolution | Low Rate Camera (up to 1080p) |
| Air Filter | None |
| Fully Enclosed | No |
| Bambu Micro Lidar | No |
| COMPATIBLE MATERIALS | |
| Third-Party Filament | Yes |
| Material Types | Standard (PLA, PETG, Flexibles [TPU, TPE]) Support (PVA) |
| COMMUNICATION | |
| Display | 3.5" IPS Touch Screen |
| Display Resolution | 320 × 240 |
| Connectivity | Wi-Fi, Bambu-Bus |
| Storage | microSD |
| Control Interface | Button, APP, PC Application |
| Motion Controller | Dual-Core Cortex M4 |
| Led | Included |
| SOFTWARE | |
| Recommended Slicer | Bambu Studio Compatible (but reduced access to some printer features) Cura Superslicer Prusaslicer |
| Compatible OS | Windows, MacOS |
| Supported File Format(s) | 3MF, STL |
| WI-FI | |
| Frequency Range | 2412 MHz - 2472 MHz (CE) 2412 MHz - 2462 MHz (FCC) 2400 MHz - 2483.5 MHz (SRRC) |
| Transmitter Power (EIRP) | ≤ 21.5 dBm (FCC) ≤ 20 dBm (CE/SRRC) |
| Protocol | IEEE 802.11 b/g/n |
| POWER | |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| AC Input | 350W@110V, 1000W@220V |
| PACKAGING DIMENSIONS | |
| Packaging Dimensions (W × D × H) | with AMS Lite 560mm×540mm×430mm (22"×21.3"×16.9") without AMS Lite 596mm×536mm×325mm (23.5"×21.1"×12.8") |
| Gross Weight | with AMS Lite 13.5kg (29.8lbs) without AMS Lite 13kg (28.7lbs) |
| WARRANTY | |
| Warranty Period | 1 Year
|
To print advanced materials (ABS, PC, Nylon / PA, ASA), check out the Bambu Lab X1 Carbon or Bambu Lab X1E 3D printers.
FAQ
What materials can the Bambu A1 3D print?
The Bambu Lab A1 3D Printer is ideal for extruding PLA, PETG, Flexibles [TPU, TPE], and PVA.
Can the Bambu A1 3D printer extrude more advanced filaments?
While the Bambu Lab A1 can technically extrude other filaments like ABS, ASA, PC, Nylon / PA, and composites (like NylonX), it is not recommended because the A1 does not come equipped out of the box to succeed with these materials.
To print these materials, consider the Bambu Lab X1 Carbon or Bambu Lab X1E instead.
Can I enclose the Bambu A1?
It is NOT recommended to enclose the Bambu Lab A1 3D Printer.
If you desire an enclosed FDM 3D printer, check out the Bambu Lab P1S, Bambu Lab X1 Carbon, or Bambu Lab X1E.
Can I use the Bambu AMS on the A1?
No. The AMS is incompatible with the Bambu Lab A1. Use the AMS Lite for multi-color 3D printing with the Bambu Lab A1 3D printer.
Can I use multiple Bambu AMS Lite units with a single Bambu Lab A1 for up to 16 color prints?
No. The Bambu A1 can only support one AMS Lite, meaning a maximum of 4 colors.
If you desire the optional capability to print over 4 colors, check out the Bambu Lab P1S, Bambu Lab X1 Carbon, or Bambu Lab X1E.
