Bambu Lab Bambu Lab Mandarin Orange Matte PLA Filament Refill - 1.75mm (1kg)

The Bambu Lab Matte PLA is a 1.75mm diameter PLA 3D printer filament compatible with any 3D printer and optimized for Bambu Lab X1 series and P1 series printers. It utilizes RFID technology with the Bambu Lab AMS and is available with a Refill option.

  • Compatible with RFID Technology
  • Eco-friendly Refill Option
  • Nozzle Temp: 190 - 230 °C
  • Bed Temp: 35 - 45 °C
  • Save on the Pack of 10 spools
loading...
Product No. loading...

Bambu Lab PLA Basic

The Bambu Lab offers PLA Basic 3D printer filament compatible with any 3D printer and especially optimized for their Bambu Lab X1 Series and Bambu Lab P1P.

Key Features of the Bambu Lab PLA Basic:

  • Made of Polylactic Acid (PLA)
  • 1.75mm Filament Diameter
  • Compatible with RFID Technology on the Bambu Lab AMS
  • Recommended Nozzle Temp: 190 - 230 °C
  • Recommended Bed Temperature: 35 - 45 °C
  • Glue Stick Recommended
  • Available as a Refill for a More Eco-Friendly Option
  • Reuse Previous, Print, or Purchase a Bambu Reusable Spool





Recommended Printing Settings

Description Value
Nozzle Temperature 190 - 230 °C
Bed Temperature (with PVP Glue) 35 - 45 °C
Drying Settings before Printing 55 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Printing Speed < 300 mm/s

Physical Properties

Property Value
Density 1.24 g/cm³
Vicat Softening Temperature 57 °C
Heat Deflection Temperature 57 °C
Melting Temperature 160 °C
Melt Index 42.4 ± 3.5 g/10 min

Mechanical Properties

Property Value
Tensile Strength 39 ± 2 MPa
Breaking Elongation Rate 12.2 ± 0.4 %
Bending Modulus 2750 ± 60 MPa
Bending Strength 76 ± 3 MPa
Impact Strength 26.6 ± 2.8 kJ/m²

How Do I Refill my Bambu Lab Reusable Spool?


Step 1 - Align Refill with Spool

  • Find the locator (a tiny block on the wide piece).
  • Align it with the notch on the inner ring of the filament roll.
  • Insert the wide piece into the filament roll.
Bambu Lab Refill Step 1
Bambu Lab Refill Step 2

Step 2 - Insert Narrow Piece & Lock In Spool

  • Insert the narrow piece and align the groove of each piece inside of the spool until it's pushed firmly into the wide piece.
  • Once it's pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 3 - Install Shim & Remove Strips

  • Install the spacing shim inside the spool (under the triangle)
  • Pull out the 4 plastic strips
Bambu Lab Refill Step 3

Need a visual step-by-step tutorial? Check out the Youtube video above.

Back to top