BASF ColorFabb Dark Gray nGen Flex Filament - 1.75mm (0.65kg)

The materials experts at BASF have developed and optimized a new ABS for easy and printing and incredibly strong parts. Made with Polyscope XILOYTM 3D, Ultrafuse ABS Fusion+ adheres easily to glass printing surfaces and boasts high heat and chemical resistance, with very low warping and superb toughness. Ultrafuse Fusion+ is perfect for automotive applications, or whatever heavy duty parts you need to print.

List Price: $45.95 (with add-ons)
Availability: Currently Unavailable
Add to wishlist
Product No. M-NJZ-HKF0
Filament Diameter: 2.85mm
1.75mm
2.85mm
Color: Grey

BASF's Forward AM team developed Ultrafuse ABS Fusion+ by enhancing it with Styrene Maleic Anhydride (SMA), a polymer known for its high dimensional stability, leading to a rock-solid ABS that will provide strength and reliability.

Documents

California Residents

Warning: This Product can expose you to styrene, a chemical known to the State of California to cause cancer. USE WITH ADEQUATE VENTILATION. See www.P65Warnings.ca.gov
Warning: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Questions View All Responses

As I look at the Olsson Ruby nozzles, it doesn't list the Ultimaker 3 Extended as a unit that can run these nozzles. I'd like to run Nylon, NylonG and NylonX, as well as other filaments through this printer and want to be sure if and which of the Olsson Ruby nozzles will fit work in this unit?

View 1 Response

Can I use PET/ PETG Filatment?

View 1 Response

is the Ultimaker 3D extended 3D printer come assembled. MLJS4Z1H

View 1 Response

Hello, Where is it made? I need country of origin for customs form.

View 1 Response

Does the UM 3+ Extended support WIFI connectivity?

View 1 Response

How many amps/volts does this printer use when printing? How many printers can be daisy chained on a 20 Amp circuit?

View 1 Response

Am I able to submit a PO for the purchase and be billed for the product so my company can issue a check?

View 1 Response

can it print candy?

View 1 Response

I am new to 3D printing, is this printer a good starting point for me as a beginner.

View 1 Response

what is the maximum travel and print speed of this printer?

View 1 Response

Can Ultimaker 3d printers, especially the 2+ and 3 extended, be used as a precision motion control system ? The application would require resting an electronic balance on the build platform. Horizontal and vertical travel would be used to dip springs into a solution, then press them against the electronic balance to evaluate a force-displacement curve. Displacement is in steps of 0.06 mm. -Purvis

View 1 Response

With the Hydroscopic (sp? Water reactive) properties of some filaments, how is this problem mitigated with the UM3?

View 1 Response

Will I need to buy anything else with this in order to start printing today?

View 1 Response

Does the UM3 have a Tunell filament sensor or some other means of automated pausing the print in the event of a clogged nozzle or broken filament?

View 1 Response

What are the computer requirements for operating the Ultimaker 3 Extended? (E.g. Mac/pc, etc.)

View 1 Response

Are you forced to use Cura or can you use S3D also?

View 1 Response

How secure is the module nozzle system. Will it come loose or loosen during the print?

View 1 Response

Ultimaker 3 Extended... In the setup video they recommend not to touch the back of nozzle assembly and to insert level. Why?

View 1 Response

How easy is the Ultimaker 3 Extended to clean the nozzles. Spluges build up on any nozzle in time.

View 1 Response

Do you have to use only their Filament and reels? I am interested in purchasing a Ultimaker 3 Extended but do not want to be locked into just their filament. I also print with PETG and need it to be able to handle that filament.

View 1 Response

What is the difference between AA and BB cores? Also, any foresight on other nozzles that may be available later?

View 1 Response

Can I get a quote for UM3 extended, UM2+ extrusion upgrade kit and UM2+ maintenance kit

View 1 Response

One each of Core AA and BB are included in base price, right?

View 1 Response

Ask a question about this product

Back to top