Bondtech Bondtech CHT BiMetal M6 Coated Nozzle - 1.00mm

The Bondtech CHT BiMetal is a high-flow nozzle designed for use with abrasive materials. It is made of a copper body with hardened vanadium steel inserts and nickel coating.

  • Copper body with hardened Vanadium steel inserts for durability
  • Nickel coating for increased wear resistance
  • Optimized for 1.75mm filament but compatible with 2.85mm filament

*Please note that the BiMetal Nozzles' copper body is coated with nickel (silver).

Price: $39.90 (with add-ons)
Availability: In Stock
Order Now:
Ships Today MatterHackers Shipping Truck Free U.S. Shipping - excludes Alaska and Hawaii
Qty
Add to wishlist
Product No. M-WYP-N6P1
Nozzle Type: M6
Nozzle Sizes: 1.00mm
0.40mm
0.60mm
0.80mm
1.00mm
Nozzle Pack

Please be aware of the following:

  • Avoid Cold Change Of Bondtech CHT Nozzles

Copper is a soft material and doesn't withstand high mechanical efforts.
Before removing or tightening any Bondtech CHT nozzle, heat it up to 280C, or at least above 250C.
Use at most 1.0 Nm torque. Recommended Torque is 0.5 Nm.

  • Nozzle Size limitation for fiber filaments

For Carbon or Glass fiber-loaded abrasive filaments use only 0.6, 0.8, and 1.0mm nozzle sizes.

  • Nozzle size for particle filaments

For metal, wood, glitter, or other particle-loaded abrasive filaments you may use the 0.4mm nozzle size.

Bondtech CHT BiMetal Coated Nozzle Features:

  • Copper body with hardened Vanadium Steel inserts and Nickel Coating
  • Available sizes: 0.40, 0.60, 0.80, and 1.0mm.
  • Optimized for 1.75mm filament but compatible with 2.85mm filament
  • Requires 6mm wrench

Copper and Hardened Vanadium Steel Nozzle for Highflow Applications and Abrasive materials

BiMetal for highflow applications with abrasive materials

The Bondtech CHT BiMetal is designed to work with Carbon and Glass fiber composite materials with a higher melt capacity due to the increased surface area of the heating walls. Machined with ultra-precision and is made of a Copper body with Hardened Vanadium Steel inserts with Nickel coating. Flow Rate gains between 25 and 65% making this nozzle a competitive price/performance option. Increase your Max Volumetric flow with the Bondtech CHT BiMetal Nozzle!

the BiMetal Nozzles are then coated with Nickel

Compatible with the following blocks/printers

M6 / Reprap

  • Mosquito® / Magnum
  • Mosquito® Liquid
  • Mosquito® Magnum+
  • Copperhead™
  • E3D Chimera and Kraken
  • E3D V4, V5 and V6 blocks
  • Prusa i3, Prusa Mini
  • RepRap M6

MK8

  • bq Hephestos
  • Hephestos 2
  • bq Prusa i3 Hephestos
  • bq Witbox
  • bq Witbox 2
  • Creality CR-10
  • Creality CR-10-S4
  • Creality CR-10-S5
  • Creality CR-10S
  • MakerBot Replicator
  • MakerBot Replicator 2
  • MakerBot Replicator 2X
  • Creality Ender 2
  • Creality Ender 3 Pro
  • Creality CR-20 Pro
  • Creality Ender 5
  • Craftbot family
  • Creality CR-10 V2
  • Creality CR-6 SE
  • Creality CR-10 Smart
  • Tevo Tornado

Volcano

  • E3D Volcano blocks
  • Other Volcano type blocks
  • Artillery Sidewinder X1 and X2
  • Anycubic Vyper
  • FLSUN Super Racer
  • Artillery Genius Pro
  • Anycubic Kobra and Kobra Max
  • Lulzbot TAZ MOARstruder




Questions View All Responses

What is included with the nozzle pack? I see a photo of 4, but no sizes mentioned. Also, it's more expensive than getting 4 separately?

Add Response

Wondering if the MK8 nozzle will work with the Creality S1 Pro? Its not listed but the hot end is not much different than other Creality printers.

View 1 Response

Is that price for 1 or 3 nozzles ?

Add Response

Bondtech CHT BiMetal Vol Coated Nozzle - 0.40mm, will this fit creality K1?

Add Response

Will this fit the Creality Speedy (Ceramic) Spider? (The current v4 Spider Hotend)

Add Response

Bontech CHT Bi-metal 0.4mm - How to clear partial clog? Tried with needle and no deal.. it does get some stuff but not whatever is causing a partial clog somewhere within the nozzle. Tried heating it up to 300c.... It bubbles but clog still remains. Nozzle still prints but with extruder skips if going too fast. No i will not slow down, it worked find at faster speeds until it clogged up. I actually got the clog when swapping from PLA+ to MH dual color filament. Luckily for me i have spare nozzles but would like to get this sorted out so i can use it.

View 1 Response

Why can't I use a cleaning rod with this tip? I have tried it both hot and cold. The rod will go through other 0.4mm tips.

Add Response

Which nozzle type is compatible with creality ender 3 s1?

View 1 Response

Will this work with Raise3D N2? If so, which one?

View 1 Response

Will the Bondtech CHT BiMetal Vol Coated Nozzle - 0.40mm work for a FLSUN V400?

View 1 Response

Can you use for printing any materials, such as PLA or are they only for printing Carbon and Glass fiber composite materials?

View 1 Response

Ask a question about this product

Back to top