Bondtech Bondtech Prusa i3 Extruder Upgrade Kits MK3S+/MK3S/MK2.5S - Mosquito
The Bondtech Prusa i3 Upgrade Kits bring the latest Bondtech technologies to your Prusa i3 3D printer with optimized design for use with Mosquito and Mosquito hotends, including Dual-Drive extruder gears, a 3:1 gear ratio for increased torque, and more precise control of filament during both extrusion and retraction. Overall, this upgrade kit will increase the print quality of your Prusa i3, making it easier to produce high-quality prints.
- Allows for increased torque and more precise filament control
- Custom-built for your exact Prusa i3 machine
- Adds the benefits of a standard Bondtech extruder
| List Price: | $113.00 |
|---|---|
| Price: | $113.00 |
| Price: | $... |
| Availability: | Currently Unavailable |
Bring the best of Bondtech technologies to your Prusa i3 3D printer
These Bondtech upgrade kits for Prusa i3 3D printers allow anyone to bring the latest Bondtech technologies such as Dual-Drive extruder gears and a 3:1 gear ratio for increased torque and more precise control of filament during both extrusion and retraction. Overall, this upgrade kit will increase the print quality of your Prusa i3 with all the benefits of a standard Bondtech extruder, but in a custom package purpose-built for your exact machine. If you are operating an older Prusa i3 and want to get a tune-up for increased performance, this is the place to be.
Waste-not by reusing the existing fan and filament sensor from the stock machine
To use this Upgrade Kit, you will also need to buy the following:
- a Mosquito Hotend or a Mosquito Magnum Hotend for higher material flow
- Boron Nitride Paste
- the SLS X-Carriage Kit for higher temperature and mechanical resistance (you can download the STLs in the Resources section and 3D print them)
Questions
can you upgrade to a nozel that prints over 300
Does the printer frame allow for lexan panels to be attached to it to create a heat chamber? If so, would it improve the print quality?
Are the 4 nozzles only for printing 4 objects, or can they be used for printing one 4-color object?
What power supply is used within this system? I see on the specs Voltage ranges from 100 - 120V / 220 - 240V, what determines whether it's the lower range or the upper voltage range? Asking to understand if this used standard wall outlet or if I'll need a higher power outlet like an appliance outlet.
Do you sell spare parts for the Orange Storm Giga? Specifically the wiring hardness and the stepper motors?
If you get the 4 nozzle kit how do you print one large object if the heads are now fixed as a single head can no longer travel the full distance?