ColorFabb ColorFabb GlowFill Glow in the Dark Filament - 1.75mm (0.75kg)

PLA/PHA is a hybrid material of PLA fused with PHA. This combination of materials significantly increases the toughness of the filament while also ensuring stellar layer adhesion. Plus, by merging these two together, PLA/PHA is also biodegradable.

List Price: $45.95
Availability: Currently Unavailable
Add to wishlist
Product No. M-JUH-CV02

ColorFabb's PLA/PHA blend is a high quality filament that won't let you down. This unique combination allows for stronger prints with little to no warping.

This material will print successfully on both heated and non-heated print beds. However, if printed on a non-heated platform, using blue painter's/masking tape is instructed.

PLA/PHA is perfect for any protoype or production needs, as this filament is not only tough but pretty too! PLA/PHA comes in an impressive array of colors you won't be able to refuse.

Technical Specifications:

Filament Diameter: 1.75mm

Diameter Tolerance: ± 0.05 mm

Density: 1.210-1.430 g·cm-3

Glass Transition Temperature: 55C

Printing Temperature: 195-220C*

Print Speed: 40 - 100 mm/s

Heated bed (if you have one, not strictly necessary): 50-60C

Questions View All Responses

Is Infinite Void Black PLA abrasive? Does it have a matte appearance?

View 1 Response

Would Pro filament work with Creality Ender 3

View 1 Response

Is MH Pro PLA compatible with the Raise3D E2 printer?

View 1 Response

Is "Antique White" semi translucent? Its the same that sent free with the Ender 3 printer?

Add Response

Concerning Product No. M-L76-6JVU, do you know what the RGB or Hex code is for this color? I'm looking for this color with these settings. PANTONE: PMS 208 C Hex Color: #630031; RGB: (99, 0, 49) Thanks.

Add Response

Why do you not describe the color properties of your filament with details like has sparkles or other add-ins? I got a roll of Antares Red and upon arrival found it had glitter in it where the images all depicted it as a solid crimson. Not what I was looking for.

Add Response

Everything seems to be out of stock. Is there something amis? Or just wait?

Add Response

I'm looking to buy this product. Can't seem to find anything like it, but I need it in 750g spool for Ultimaker S5. Could I get this order in 750g instead?

View 1 Response

Is the Jet Gray PRO Series PLA Filament - 1.75mm (1kg) consider as non conductive for electrical voltages up to 480v? If not is there a special filament that would meet this standard need to make s few custom insulator bushings for a 480v box.

Add Response

What are the recommended drying settings?

View 1 Response

Question.....do you guys carry or have this in a Dark Military Green and or a Dark Grey Green? need this color for the 1:6 scale Military projects that I am doing...........olive drab is to light and will not work on exterior purposes

View 1 Response

whats the difference between the infinite void black and black, will the particulate (as it seems to be) in the infinite void mask common imperfections from layers?

View 1 Response

Are either the electric pink PRO or the magenta MH Build fluorescent? Thanks

View 1 Response

What is the tare weight of the empty spool.

View 1 Response

Do you have tested filament profiles for use in PrusaSlicer?

View 1 Response

Curious about the lighting qualities of this product - do thin layers of white allow light through? Is it translucent when applied in thin layers? Looking to put an LED behind a thin layer of this filament.

View 2 Responses

Ask a question about this product

Notify me when this item becomes available

Available Financing

Back to top