Sorry, this product is currently unavailable
Perhaps some of these categories are of interest:
ColorFabb ColorFabb PA-CF Low Warp Filament - 1.75mm (0.75kg)
ColorFabb PA-CF Low Warp is a one of a kind polyamide formulation with the ability to print nearly warp free on non-heated build platforms. Infused with carbon fiber for increased stiffness, it is recommended that users print with wear resistant nozzles such as E3D hardened steel nozzles or Olsson Ruby.
List Price: | $85.00 |
---|---|
Availability: | Currently Unavailable |
ColorFabb PA-CF Low Warp excels in tensile and impact strength, the material allows continuous use at 120°C while retaining sufficient mechanical properties.
The formulation has been modified to reduce the uptake of moisture – it takes roughly 4 times longer to reach the saturation point when compared to unmodified PA6 – this makes PA-CF Low Warp less affected by moisture than most other nylon filaments available on the market.
TECH SPECS:
- Print Temperature: 260-280 °C
- Print Speed: 30-40 mm/s
- Heat bed: ambient – 50°C ( Heated bed is not strictly necessary)
Questions
what other material is the same as this?
Does this filament need to be printed from a dry box like other nylon filaments?
Does this filament need to be printed from a dry box like other nylon filaments?
The printing nozzle temp...260 - 280...my printer only goes to 250 deg.C. (JGAurora A5S). I am desperate to find a non-warping substitute for ABS for an interior automotive console fascia (21 YO car, obsolete part). Needs strength and temp (Arizona desert). This PA-CF looks viable. Any advise?
Is it’s possible to print this material without an enclosure?