CraftBot CraftBot Flow/Flow XL Build Plate

When you have a big production job with lots of parts to print, you can't spare the time required to carefully remove each printed part from the bed before starting the next iteration. The solution is to have a spare build plate on hand, so as soon as one job is done, simply remove the plate and swap in your spare, and get back to the job at hand. This gives you plenty of time to remove each print with care, all while your CraftBot Flow prints away at the new job. Sized at 300mm x 200mm (11.8" x 7.9"), and coated with a sheet of Kapton, this spare Build Plate fits perfectly on a CraftBot Flow or CraftBot Flow XL, and provides excellent adhesion for most printing materials--especially the sometimes difficult ABS.