Sorry, this product is currently unavailable
Alternative products you may be interested in:
Creality3D Creality3D CR-10S 3D Printer
The Creality3D CR-10S is here at MatterHackers! This powerful but inexpensive machine is great for tinkering, modding or simply getting started with 3D printing. The CR-10S iterates on the powerful CR-10 design by improving stability both in structure and function thanks to the dual lead screw design, the filament runout sensor and the print recovery functionality. And by keeping the power supply and control interface separate from the main body of the printer, you have much more control over your workspace layout.
| List Price: | $425.00 |
|---|---|
| Availability: | Currently Unavailable |
Easy Assembly
The CR-10S comes as a kit that only requires three pieces for assembly. It typically takes only ten to fifteen minutes before your Creality3D CR-10S is up and running.
Improved Design
Creality3D listened to feedback on their popular CR-10 and upgraded the design on the CR-10S in some exciting ways:
- Dual Z-axis lead screws, which improve print quality by increasing stability.
- Filament Runout Sensor, which will pause a print if your spool runs out of filament, so your overnight prints are safe!
- Print recovery function, which will pause if the power to your printer is interrupted for any reason, and allow you to pick up where the print left off.
Hackable and Upgradable
The Creality 3D printer line is completely open-source, allowing for add-ons and upgrades of almost every component on the machine. From a BL Touch automatic bed leveling probe, to a Micro-Swiss or E3D all-metal hotend, to a Bondtech extruder - the Creality 3D printers give you an awesome foundation for experimentation.
Technical Specifications
Print Size: 300mm x 300mm x 400mm (11.8" x 11.8" x 15.8")
Build Platform: 320mm Length x 310mm Width
Print Accuracy：±0.1mm
Nozzle：Brass 1.75mm x 0.4mm (can be swapped out for 0.3mm or 0.2mm)
Maximum Print Speed: 200mm/s
Max Hotend Temp: 240°C-245°C
Max Bed Temp: 90°C
Supported Materials: ABS, PLA, TPE
Feed System: Bowden
Connectivity: USB or SD card
Supported OS': Windows, Mac OSX, Linux
Supported Slicing Software: CURA, Simplify3D
Firmware: Repetier-Host
Weight: 10.2kg (22.5lbs)
Note: The small metal clips on the borders of the Build Platform reduce the reliable print area by a small amount. If you intend to replace the Build Platform with a glass plate, you can either use a sheet of glass dimensioned at 320mm x 310mm, or place a smaller glass plate on top of the platform, and attach via standard document clips.
The separated control unit and power supply allows for greater flexibility when setting up your printing space.
Package Includes:
- Base Frame
- Vertical Frame
- Power Supply Unit
- Build Plate Tape - 1 Roll
- Filament Spool holder
- Tie - 1 Set
- Cutting Nipper
- Wrench
- Screw - 2 Sets
- Spatula
- Cables (Power, USB)
- Bowden Tube
- SD Card
- Limit Switch
- 0.4mm Nozzle - 1pc
- Nozzle Unclogging Tool
- 200g Filament - 1 Roll
Questions
Will you ever get the cr10 v2 or v3?
Hi, what is the footprint of the CR10S
I have the Creality cr-10s 3D Printer. I tried to configure the DLTouch auto leveling device. Being new owner and not understanding how to properly do the up grand. I miss up somewhere now the computer does not recognize the printer. How do I reset the printer mother board back to factory settings?
When do you think this will be back in stock?
Is your estimated time for this to be back in stock usually pretty accurate?
Is it possible to convert from 1.75mm to 2.85mm filament?
Do you ship to Canada ? If so, are there any additional costs ? Thanks
Where can I yet an upgraded board for the new hot end since we accidentally turned it off after it was done deleting all the software
Hello, Recently I purchased Creality CR 10S. I would like to print a water manifold for a PWC engine the temperature will be approximately 175 degrees Fahrenheit. I spoke to your technical department earlier today and they were to email me the parts and filament needed to make this part. I have yet to receive the information. He did recommend a filament and a add on to increase the tempature of the CR 10S, he believed the nozzle that came with the CR10 would work with the filament he suggested. Can you please send me the parts I need to purchase. Also is there any additional steps I need to take to make sure the print adheres to the table?
How can i print abrasive materials with this machine?
Is the hot end on the machine 12 or 24 volt?
When do you plan on getting more of these in stock?
When do you plan on getting more of these in stock?
Hi @atdmattercontrol2017! I am not sure I understand your question here. If you are using a Mosaic Palette, I do not see that being an issue at all.
Can the printer, print multi color G-code. For example Color Print by Prusa Research; sliced with Prusa Control.
Does this come with a glass bed?
Does Matterhackers do custom in-house, pre-ship upgrades (for a fee, of course), aka, the E3D V6 or upgraded extruder?
Would the CR-10S be able to print MH build series PETG filament stock or would an upgrade be needed? It seems to be at the top of the hot end range
I know shipping is free but is it tax free as well? Just curious to how much I need t dave to get a cr10s
3D newbie... So with upgrades this little printer can print other material besides the 3 you mention above. If so where can I find that info... what I need in upgrades to print what material? thanks Grumpy aka Bob
This is cool. Be nice to be able from a reliable seller. Are you going to sell the Supporting Rod Set that makes this printer even better?
Are these tested and inspected like Tiny Machines does? Creality failure rate is pretty high and I would hate to get a broken unit.
If I were to put a Olsson Ruby nozzle in this printer would it be possible to print with nylon/NylonX
are there upgrades for this unit? for other filaments or dual extruders?
Will you guys sell the Ender3 Kit?
Does the installed firmware have thermal runaway protection pre-installed/enabled?