USSynthetic Gray PRO Series Ryno Filament - 1.75mm (10lb)
Print high precision parts out of any material using the strongest substance on earth: diamond.
Top DiamondBack High Performance Nozzle Features:
• Prints any filament—nozzle changes are a thing of the past
• Improved print quality and layer adhesion thanks to excellent thermal conductivity
• Greatly reduces filament clogs and is easy to clean
• Perfect wear resistance—the nozzle that lasts a lifetime
• Compatible with V6-style or Mk8-style hotends
| Price: | $220.00 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Today Free U.S. Shipping |
The Diamondback Nozzle
An Indestructible, All-Purpose, 3D Printing Nozzle
The DiamondBack Nozzle is the single-solution nozzle that improves print quality across any material, and lasts beyond any other material.
Here are the key features of the DiamondBack Nozzle:
- Prints any filament--nozzle changes are a thing of the past
- Improved print quality and layer adhesion thanks to excellent thermal conductivity
- Greatly reduces filament clogs and is easy to clean
- Perfect wear resistance--the nozzle that lasts a lifetime
- Compatible with all V6-style hotends or Mk8-style hotends
- Made in the USA
Technical Specifications
- V6 Compatible
- Thread Type: M6x1.0
- Thread Length: 7.6mm
- MK8
- Thread Type: M6x1.0
- Thread Length: 5mm
Operating Tips
- Recommended torque specs: 2.5 Nm (Newton Meter)
- Recalibrate z-offset after install to protect print bed
- Run temperature tower as optimal temperatures are typically lower
- Recommended start temperatures:
- PLA: 200°C – 215°C
- PETG: 230°C – 250°C
- PETG Carbon Fiber: 245°C – 265°C
- Maximum temperature 300°C
Questions
What are the dimensions of the 5lb spool? When I select the 10lb spool, the dimensions listed under the Technical Specs do not change. I want to make sure the 5lb spool fits in my filament dryer.
This is comment and not a question. I just made a set of 3 parts with RYNO for the first time. After 2 tries at getting the temps and speeds set correctly, I made 99.9% perfect prints of all 3 parts in pretty reasonable times on my AnkerMake M5. I was pretty stunned at the results. Really like the results with Pro Series RYNO. For anyone else that needs reference: Fan 100% with fan disabled for first 3 layers. Bed is standard AnkerMake PEI cleaned with alcohol before start of print. Nozzle temp: 245°C Bed temp: 65°C First layer speed: 50 Outer wall speed: 60 Inner wall speed: 80 Sparse speed: 60 Internal solid infill speed: 60 Top surface: 65 Gap infill: 50 Support: 65 Travel: 500 Filament was in dryer for 3-4 hours to get down to 22%RH and ran from dryer with RH between 18-22% during printing.