Sorry, this product is currently unavailable
Alternative products you may be interested in:
E3D E3D RapidChange Revo XS Hemera Hotend Kit
The E3D Revo Hemera XS is a compact and lightweight extrusion system designed for enhanced 3D printing performance. It is compatible with a wide range of filaments, including challenging materials, and offers easy nozzle swaps with the Revo system. Its custom stepper motor and reduced inertia enable faster movement and reduced print artifacts.
- Compact and lightweight design-
- PTC means the HeaterCore can't melt at extreme temperatures
- Ships with a premium crystal-clear fan duct
Availability: | Currently Unavailable |
---|
Key features of the E3D Revo Hemera XS
- Compact and lightweight: 92g lighter and 11mm shorter than classic Hemera, resulting in less inertia and faster movement.
- Wide filament compatibility: Works well with various materials, including flexibles and abrasives, thanks to enhanced extrusion and retraction control.
- Backwards compatibility: Accepts Revo Nozzles and V6 nozzles with a Hemera HeatBreak (sold separately).
- High extrusion force: Capable of driving the entire E3D ecosystem, including high-flow HotEnds like SuperVolcano and high-flow Revo Nozzles.
- Reduced filament stripping: Stalls instead of stripping filament during jams, making recovery easier.
- Easy nozzle swaps: Revo Nozzles enable tool-free and hand-tightened changes.
- Improved safety: Built-in PTC behavior reduces power to the Revo HeaterCore as it heats up, protecting against thermal runaway hazards.
- T-slot flat mounting: Custom mounting system allows for various accessory attachments.
- Complete kit: Includes Revo Nozzles, Revo HeaterCore, and all necessary components for 3D printing.
No machine redesign. top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print.
Ready for Revo. Revo is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today.
Enhanced performance. Revo uses a Revo HeaterCore, the latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium heaterblock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway.
Technical Specifications:
- Drive Type: dual drive with adjustable tension idler
- Max Printing Temperature: 300°C
- Nominal steps per mm (x16): 397
- Filament diameter: 1.75mm
- Mass (Direct): 256 grams (Including Revo hotside)
- Voltage: 24V
Questions
Will this resin work on a Prusa SL1?
Will this resin work with s100 moonray printer and if so will the standard gray setting work?
Two part question. First, will it work on machines such as the Anycubic Photon? Second, does anyone know if a way to add color to the resin?
What does hi temp mean as far as requirement for machine?
Will this work with a 405nm DLP system? If it would hold together, would it require post curing since the DLP system doesn't generate as much energy?
Does this resin cure transparent?
Anyone happen to know the refraction index of the Peopoly NEX Clear after curing?
Can you provide a product cut sheet or safety data sheet?
Peopoly hosts all of their resin data below:
http://wiki.peopoly.net/doku.php?id=moai:aboutresin