Sorry, this product is currently unavailable
Perhaps some of these categories are of interest:
E3D CLEARANCE - E3D SuperVolcano Nozzle - 3.00mm x 0.80mm
The E3D SuperVolcano hotend is built for high speed, super strong parts. The elongated melt zone needs an extra long nozzle to complete the setup. For general purpose 3D Printing, you can't go wrong with the mainstay bass nozzle. If you are just starting out with SuperVolcano or will be printing PLA only, this nozzle will get the job done!
List Price: | $11.00 |
---|---|
Availability: | Currently Unavailable |
Please note, all Clearance Item purchases are final and are not covered by the MatterHackers Return Policy - this excludes Refurbished 3D printers and machines which have at least a 6-month warranty.
Reason for Clearance: This item is being discontinued.
The spine of SuperVolcano
This extra-long high performance brass nozzle is perfectly suited for use with the E3D SuperVolcano hotend. For non-abrasive materials with a printing temperature under 300°C the superior thermal conductivity of brass makes it the preferred material for general-purpose 3D printing.
The assembled SuperVolcano
Technical Specifications
- Filament Diameter: 2.85mm
- Nozzle Diameter: 0.80mm
- Hotend Compatability: E3D SuperVolcano
Easily Identify your nozzle:
- 0 Dots: 0.60mm
- 1 Dot: 0.80mm
- 2 Dots: 1.00mm
- 3 Dots: 1.20mm
- 4 Dots: 1.40mm
Questions
Hi, I read that PETG and nGen are quite similar. PETG has UV resistance, but I can’t seem to determine if nGen i has it as well. Could I get some information regarding the comparative UV resistance between the two. Thanks.
Why do you only have qty 3 silver in ColorFabb nGen? We will need over 100 over time.
I agree with Don that it would be great to have more technical detail about nGen vs. PETG. nGen seems to be a lot tougher, actually remarkably strong when compared to the brittle PETG. I would like to know about, 1) the UV resistance and, 2) the glass transition temp (temperature tolerance of finished prints). Thanks