E3D E3D Titan Aero HotEnd and Extruder - 1.75mm (12v)

The E3D Titan Aero combines the Titan Extruder and the V6 Hotend into one super-compact package. Available in 1.75 and 3mm, 12v and 24v as well as standard and mirrored varieties perfect for dual extrusion 3D printers. Mount a standard Aero next to a mirrored model for compact and easy to manage dual extruders.

List Price: $96.00
Availability: Currently Unavailable
Add to wishlist
Product No. M-04L-CSVH

Compact & Rigid design

The magic of the Aero is combining the hotend and extruder, producing a very slim profile. Upgrading to a Titan Aero allows for an additional 25mm of vertical (Z-axis) build volume thanks to it's small size. A compact design also makes the Aero extremely rigid and capable of printing faster than other hotends.

Easy to install and maintain

Mounted using the standard NEMA17 pattern, the Titan Aero is ready to be installed in a wide variety of existing 3D printers. Incorporating Titans engineering and proven extrusion system makes Aero a highly reliable and feature rich component. Loading and unloading filament, manual extrusion, adjusting idler tension and clearing debris are effortless with this simple design. The use of Titans 3:1 gearing allows for smaller motors and a lighter weight carriage, improving the long term reliability of your 3D printer as a whole.

All metal hotend built from the E3D V6

Built on the legendary E3D V6 all metal hotend, the Titan Aero reliably prints any filament at temperatures up to and beyond 300°C. With the V6 heatbreak, you can interchange components with any E3D parts. Choose your own temperature sensor, heater cartridge or nozzle, including any Volcano products.

The complete Titan Aero

Ultra responsive, excels with flexible material

The slim profile of the Titan Aero means the shortest possible filament path, making Aero the perfect extruder and hotend combo for printing flexible material. 3D printing flexible filament is challenging because the filament can bend and jam between the extruder and nozzle, a situation all but eliminated due to the tiny space between those two areas on the Titan Aero. This feature extends to standard filament as well, yielding improved responsiveness of the extruder. Start, stop and retract faster and with greater accuracy than any other hotend, providing more accurate, cleaner prints.

The new heat sink minimized filament path, making flexible filament easier to feed

What's in the box?

  • Titan Aero Heatsink
  • Heatsink Cooling Fan
  • V6 Heatbreak
  • V6 Heater Block
  • v6 Heater Block Silicone Sock
  • 30w Heater Cartridge
  • Thermistor
  • V6 0.4mm Nozzle
  • Titan Body
  • Idler Lever
  • 1.75mm Filament Guide
  • 2.85mm Filament Guide
  • All required assembly hardware and electronics

Includes all the necessary assembly tools

Questions View All Responses

I'd like to install this on a QIDI X-Max printer. I am assuming i'll need to design an adapter bracket. Is there a drawing or better yet a solid model file available to describe the size and mounting points?

Add Response

Will this work/Install on a Geeetech A30 PRO? What do I need to make that happen?

Add Response

can this be installed in xyz DaVinci 1.0

Add Response

is this compatable with the Sovol sv01

Add Response

1. With 1.75mm filament, what's the maximum nozzle size recommended with this setup (with V6 hotend) ? 2. Can I order this without the V6 hotend and the Volcano hotend in its place? What would the price difference be? Thanks

View 1 Response

Hello. Will this work with a Qidi Xone2? Also, I want to print NylonX so I know I need a hardened nozzle. Will I also need a new stepper motor? If so, will the NEMA 17 (the one sold here) work with my printer?

View 1 Response

Do I need to take parts from my mk3s extruder or do you supply everything I need

View 1 Response

Can I use this on MAKERBOT REPLICATOR 2?

View 1 Response

My printer currently has a 12v power supply, but I'm looking to upgrade to 24v in the future. Other than the heating element, are there any other differences between the 12v and 24v models?

View 1 Response

added this and the nema17 stepper to my cr-10 and it burned up my extruder driver due to s the stepper having a different pin out....

View 2 Responses

About 130g give or take a bit.

Add Response

What much does it weigh, with the fan?

View 1 Response

i've had issues getting flexible filament (Pro series TPU 1.75 mm) to feed in the pulse xe, is there an adaptor that would allow me will to swap out with this when i want to print flexible filaments?

View 1 Response

what type of thermistor is included? want to know for firmware.

View 1 Response

How does this work with abrasive filaments like Carbon Fiber? Is the filament drive gear a hard metal? (A2 tool steel, stainless?) or will the abrasive filament wear out the gear it is in contact with? Is this a "standard" gear that could be replaced with a hardened gear?

View 1 Response

What do I need to mount this to an Anycubic i3 Mega? (Latest Ultrabase version) Thanks!

View 1 Response

Can you put this tool piece, on a MakerBot Replicator 2 or 2x, I’m a avid engineer, so no need for long answers.

View 1 Response

What is the minimum N/cm or oz/in required to run the extruder. this may be subjective depending on material, nozzle size, ect. but a range would be a nice starting point.

View 1 Response

Would this help my ender 3?

View 1 Response

How do I send g-code commands to my ender 3, or any printer, to be able to change firmware settings such as steps/mm etc.?

View 1 Response

I plan on installing this on a Anet A8 (converted to AM8). Will I need the standard or mirrored version?

View 1 Response

This product is compatible with creality Ender 3 ?

View 1 Response

Can this be ordered with a 40w heater instead of the 30w heater or do I have to buy the Aero and the 40w heater heater separately?

View 1 Response

will this fit on a monoprice maker select plus?

View 1 Response

Will this work on my stock Cetus3d mk2. I want to try printing with Taulman Bridge Filament.

View 1 Response

Will this work with the AnyCubic I3 Mega. If so, do you have a link to an adapter block? Thanks!

View 1 Response

I have purchased a used robo3d r1 with no extruder, hot end or motor. Will this work kit work

View 1 Response

I want to get this but can it be mounted on CR-10S if I preprint some mounting adapters?? What the benefit of this one VS stock hotend?

View 1 Response

Will this work without modification, e.g. flash boot loader, on a plain CR-10? Not S or 5S.

View 1 Response

will this work on the pulse?

View 1 Response

I have an Anet A8 that is stock. What all would I need to install the Titan? Is there any firmware mods I would have to do? If so, what are some good sites to accomplish that?

View 1 Response

What is the advantage of getting a new motor versus using the one I already have on my printer (Robo r1+) or adversely the disadvantage of using my motor?

View 1 Response

Can you adapt this to a Rostock Max v2?

View 1 Response
Load 21 more questions

Ask a question about this product

Notify me when this item becomes available

Available Financing

Back to top