Formlabs Formlabs Fuse Blast
The Formlabs Fuse Blast is an automated cleaning and polishing system for SLS 3D printed parts, compatible with the Formlabs Fuse Series. It offers a rapid, hands-off cleaning process that delivers professional-grade, dust-free parts in as little as 15 minutes. Key features include pre-programmed routines for consistency, automatic and manual cleaning modes, an in-line ionizer to prevent dust resettlement, and a waste separation system to extend media life and reduce costs.
- Cleans and polishes parts in 15 minutes
- Reduces labor time and costs significantly
- Pre-programmed for consistent, automatic cleaning
| List Price: | $10,999.00 |
|---|---|
| Price: | $10,999.00 |
| Price: | $... |
| Order Now: | Processed Immediately Free U.S. Shipping |
Fuse Blast
AUTOMATED CLEANING & POLISHING
Streamline your post-processing with Fuse Blast, the automated solution that delivers clean, polished SLS 3D printed parts quickly and efficiently. Compatible with the Formlabs Fuse Series, it dramatically cuts labor costs and time, providing hands-off cleaning and a superior finish in as little as 15 minutes.
Key Features of the Formlabs Fuse Blast:
- Professional-grade parts in 15 minutes
- Drastically reduces labor time and costs
- Pre-programmed routines for consistent results
- Offers both automatic and manual cleaning modes
- In-line ionizer prevents dust resettlement for clean parts
RAPID AUTOMATED PROCESSING
Formlabs Fuse Blast offers 100% hands-off post-processing, cleaning a full build volume of parts in as little as 15 minutes with pre-programmed routines that take out the guesswork.
REDUCE TIME AND COSTS
Passive filtering via the waste separation system on the Formlabs Fuse Blast reduces media saturation and extends media life by four to eight times to save on overhead costs. Reduce time spent extracting parts on Fuse Sift by 80%.
REPEATABLE PROFESSIONAL RESULTS
With pre-programmed routines available, processing professionally-finished SLS parts has never been easier to achieve and replicate.
If you have a part that requires special cleaning, manual-assisted and handheld modes are additionally available to ensure thorough cleaning for any part size or geometry.
What are the Technical Specifications of the Formlabs Form Blast?
| Printer Compatibility | Fuse Series SLS 3D printers Third-party powder bed fusion 3D printers |
| Minimum Access Dimensions (W × D × H) |
1450mm × 1500mm × 2100mm (57.4" × 59.6" × 82.6") |
| Dimensions (W × D × H) |
1000mm × 750mm × 1750mm (39" × 29.6" × 68.7") |
| Height When Open | 195cm (76.8 in) |
| Fuse Blast Weight | 164 kg (without blasting media) 360 lb (without blasting media) |
| Media Hopper Capacity | 8.3 L, equivalent to 13 kg of 200-300 µm glass media |
| Waste Hopper Capacity | 10.6 L |
| Operating Environment | 10–36 ºC 50–96.8 ºF Elevation up to 7500 ft / 2286 meters |
| Air Handling | Negatively pressurized hood with replaceable HEPA filter Independent venting system |
| Power Requirements | w/ a vacuum that draws < 6A (230 VAC) / 12A (120 VAC) US: 120 VAC, 6A (dedicated circuit) EU: 230 VAC, 3A (no dedicated circuit or vacuum required) |
| Compressed Air Requirements | Supply at least 10 SCFM at 90 PSI / 285 SLPM at 6 bar. Regulate pressure input between 90-120 PSI / 6-8 bar. Typically achieved by a single 4 HP compressor. |
| Connectivity | Wi-Fi: 2.4 GHz Ethernet: 1000 Mbit USB: 2.0 |
| Wi-Fi Connectivity | Protocol: IEEE 802.11 b/g/n Frequency: 2.4 / 5.0 GHz Supported security: WPA/WPA2 |
| Ethernet Connectivity | RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T. |
| USB Connectivity | USB (rev 2.0) C port with a USB A-C or C-C cable |
| Sound Emission | Does not exceed 75 dB(A) |
| Fuse Blast Control | Interactive touchscreen, foot pedals for manual control |
| Included Accessories | Transfer container Control pedals ESD wrist strap 7mm socket wrench Blast orifice (3mm) Blast orifice (4mm) T-20 driver Floor mat |
| Tumbling Basket | 450mm internal diameter (Fits a full Fuse build volume) |
| Internal Work Area (W × D × H) |
710mm × 550mm × 670mm (27.9" × 21.6" × 26.3") |
| Accessible Work Area (W × D × H) |
570m × 500mm × 670mm (22.4"" × 19.6 × 26.4"") (basket removed) |
