BondTech Borosilicate Glass Plate (200 mm x 214 mm)
The ideal surface for 3D printing, borosilicate glass can be rapidly heated and cooled. Borosilicate glass is resistant to thermal shock as well as thermal expansion. (200 mm x 214 mm)
List Price: | $38.00 |
---|---|
Price: | $20.00 |
Price: | $... |
Availability: | Only 3 left in stock. |
Order Now: | Ships Monday |
A piece Borosilicate glass meant for use on the bed of a 3D printer. Its thermal properties make it useful for printing ABS and PLA, especially in conjunction with a heated bed. With ABS we recommended adding some Kapton tape and when printing in PLA we recommended adding blue painter's tape to the surface.
Specifications are as follows:
Material: Low Expansion Borosilicate Glass
Size: 214mm (+/-1.0MM) x 200mm (+/-1.0MM)
Thickness: 4 mm
Edges: Ground with machined beveled
Temperature rating = 500 degrees F (260 C) for maximum continuous operation
Questions
I am looking for a large 1M square piece of borosilicate glass. Is this something I could purchase through you?
I would like to purchase a piece of borosilicate glass plate the is 310mm x 270mm x 3mm. Is this possible from you and at what cost? If so, how do I go about making this purchase from you? Peter Boyer
What price is your best 300mm x 300mm sheet?
can you supply me with 2 pieces of borosilicate glass size: 77mm x 37mm x 3mm?
I have a robo r1+ with a build plate measuring 254x381 mm, how do I attach a smaller borosilicate plate to that? Clamps will not work because the new plate is smaller than the original one.
any new regarding 300 X 300 for cr-10s pro
What is size of glass plate in inches?
Can you cut a piece 367mm x 330mm x 5mm, with beveled edges?
Are you guys actually trying to answer these questions? If not then you should put return policy in every page
this product is vaporized in chromium ????
What sizes is this available in. I would like to use it behind my stove.
Do you have borosilicate glass 500x500 plate? (CR-10 S5)
borosilicate glass needed 229 mm x 288 mm for my 3d printer, Dan.
Hello good day Is there a flatness specification on these plates? I am looking to use it for determining friction coefficients. My e mail is a_w_prais@bd.com
Hello. I just have 2 questions. A. How easy is this to cut? B. Would it survive inside an engine compartment of a motor-vehicle to withstand heat/vibration? NB. I want to do this: http://imgur.com/a/PRCZF
Would you be able to place the 300 by 300 sheet in an oven of about 200 degrees fahrenheit
Do you have Borosilicate glass sheet with dimensions (in inches): 56 1/2 (Length) x 6 11/16 (Width) x 3/16(Thickness) ?
What can you do if the new build plate is smaller than the original one. I'm new to 3d printing.
Do you make glass beds for a Leapfrog Creatr?
do you have 300mm x 300mm plate?
Looking for a piece of sheet borosilicate glass 306mm x 406mm thickness around 3mm