MatterHackers Carbon Tripod for Artec Ray II with Dolly

LayerLock Garolite Build Surface takes the guesswork out of 3D printing nylon-based filaments by providing the strong first layer adhesion required for succeeding with any print.

Top LayerLock Garolite Features:
- Increase Nylon Printing Success - Ideal surface for nylon-based filaments
- Long-Lasting Surface - Designed to last for hundreds of prints
- Decrease Warping - Other materials compatible with this surface stick well

This product includes one square sheet of sandpaper and one PVA glue stick to guarantee success long-term success.

Availability: Currently Unavailable
Add to wishlist
Available Add-ons (2)
$63.00 $58.00 View Addon »
$70.00 $62.00 View Addon »
Product No. M-5EZ-0K5W
Printer Size Compatibility: Voron 2.4 (350 x 350)

LAYERLOCK GAROLITE BUILD SURFACE 

NYLON-BASED 3D PRINTING MADE EASY

LayerLock Garolite Build Surface is the reliable choice for consistently strong bed adhesion with nylon-based materials. By decreasing warping, succeeding with other advanced (and common) filaments just got a lot easier with this specially formulated surface.

Key Features of LayerLock Garolite: 

  • Ideal for Printing Nylon-Based Filaments
  • Durable, Long-Lasting Surface
  • Decreases Warping
  • Free Sandpaper and PVA Glue Stick included for prolonged success 

Take the Guess Out of Advanced Materials Success

LayerLock Garolite Build Surface is designed to avoid warping issues that most common bed surfaces struggle with when facing Nylon's fickle adhesion properties.

  • Easily succeed with engineering-grade materials like NylonX and NylonG
  • Save time, money, and resources thanks to reduced failures from warping
  • Learn how to succeed with nylon on garolite via this article
Beautiful NylonX printed on a LayerLock Garolite build surface

NylonG print with a Pulse XE 3D Printer in the background

Consistent Durability and Reliability That Lasts

With proper care, hobbyists and professionals can expect the strong adhesion and lifespan of LayerLock Garolite Build Surface to last for thousands of prints thanks to its specially manufactured surface that's sturdier than most print build sheets on the market.

  • Engineered to last thanks to its linen-based, phenolic properties
  • Expect consistent, reliable strong print adhesion to the bed
  • Sandpaper included prolonging surface's usability

Expand 3D Printing Material Options

LayerLock Garolite Build Surface significantly increases one's success with nylon-based filaments—while also still being compatible with standard filaments—making it a worthy go-to surface for makers to expand their filament printing options.

  • Print with advanced materials you may not have been ready to try before
  • Still print filament favorites like PLA and PETG
  • Enjoy the large variety of filaments you can print on garolite alone
A NylonX print successfully printed on a LayerLock Garolite Build Surface for the Ultimaker 3D printer

What Materials are Compatible with LayerLock Garolite Build Surface?

Compatible Material PVA Glue Needed Dry Before Printing*
NylonX / NylonG / NylonK

Nylon (Various)

PLA

TPU / TPE

PETG

RYNO

Wood-fill Materials

Metal-fill Materials

Taulman 910

Taulman T-Glase

PVA

*Some filaments absorb moisture more quickly than other filaments and need to be frequently put in a drying device to ensure they are moisture-free before printing for optimal results. We recommend the PrintDry PRO to dry filament. Why do I need to dry my filament? Check out this article on the benefits of doing so.


How Do You Install and Maintain LayerLock Garolite Build Surface?

INSTALLATION

  • Clean your build plate with isopropyl alcohol.
  • Remove the adhesive liner on the back of the garolite.
  • Attach and align the garolite onto the build plate.
  • Calibrate Z-height with the newly installed surface.
  • Level print bed

That's it! You're ready to print. For a more detailed walkthrough on "How to Succeed" with garolite installation, check out our article here!

MAINTENANCE

  • Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface.
  • Clean off PVA glue with water.
  • Be careful whenever using a sharp scraper to remove prints off the surface. 
  • If the print surface becomes damaged from scratches or slight chipping, it is recommended that users lightly sand with 220 grit sandpaper and a sanding block. It is best to sand the entire plate evenly to avoid creating low spots. Avoid inhaling dust particles from sanding by wearing a respirator mask.

Person removing a PRO Series Tough PLA printed part off a LayerLock Garolite Build Surface that comes stock with the Pulse XE 3D Printer


What Sizes are Available for LayerLock Garolite Build Surface?

Length x Width Available Thicknesses Printer Compatibility*
8" x 8" (203mm x 203mm)

• 0.033" (0.84mm)

  • RepRap Machines
9" x 10" (228mm x 254mm)

• 0.033" (0.84mm)

9.25" x 9.25" (235mm x 235mm)

• 0.033" (0.84mm)

11.02" x 14.06" (280mm x 357mm)

• 0.033" (0.84mm)
• 0.156" (3.96mm)

11.8" x 11.8" (300mm x 300mm)

• 0.033" (0.84mm)

12" x 12" (304mm x 304mm)

• 0.033" (0.84mm)

13.07" x 13.39" (332mm x 340mm)

• 0.033" (0.84mm)

13.78" x 13.78" (350mm x 350mm)

• 0.033" (0.84mm)

  • Voron 2.4 (350 x 350)
14.84" x 14.57" (377mm x 370mm)

• 0.033" (0.84mm)

*This is compatibility in terms of size. It is up to the user to confirm that their printer has the necessary components/upgrades to print the higher temp/abrasive materials listed in the material compatibility section.


What Else Comes with LayerLock Garolite Build Surface?

  • 1 x Sandpaper
  • 1 x Glue Stick

LayerLock Garolite Build Surface Technical Specifications

  • LayerLock Garolite Build Surface with adhesive backing
    • Operating Temperature: Up to 250°F (~121°C)
    • Size Tolerance: +/- 0.015"
    • Thickness Tolerance: +/- 0.005"
    • Thickness: Varies. See Table above for thickness availability of specific options.
    • Surface Area: Varies. See Table above for surface areas of specific options.
  • Sandpaper
    • Size - 3" x 3"
    • 220g
  • PVA Glue Stick
    • 0.24 oz stick
    • Water Washable

Questions View All Responses

Does this kit come with the acrylic needed to enclose the printer?

View 1 Response

Can this be shipped assembled?

View 5 Responses

What is the total weight of the kit?

View 1 Response

Is there a dual extruder that is compatible? Not Dual drive gears. This is for multiple colors or different filaments.

View 1 Response

If I buy this, can I use this machine to print the components needed in the kit that need to be printed or are they necessary to the functionality of this machine?

View 1 Response

Does this include all the LDO listed extras, and mods from the LDO docs linked?

View 1 Response

Does this ship withe the Revo 40 watt or 60 watt heater?

Add Response

Can the stock hot end on this kit handle papa-cf at 350c nozzle temperature?

Add Response

Are these kits compatible with 220V power input with no modification?

Add Response

Where are these kits shipped from? I'm based in Spain (EU), so for any product coming from outside the EU I will be charged with taxes and handling fees...

Add Response

Where is the guide to the aluminum parts?

Add Response

If the kit is ordered with blue fram is there any option to get the printed ABS parts with blue accent parts rather than red? If not do you have a recommendation for a source for printed parts with blue accent parts? Also what else is needed to build a complete ready to run printer, what else do I need to order or sourse out.

Add Response

I am planning on building a Voron 2.4 but in a 500mm size. I have a project coming up that will require between 460mm and 490mm print size. I am sourcing my own frame (I downloaded a BOM from Voron site) but I doo need a 9mm belt upgrade (not sure if that is included in the V2.4) and all other parts not including hardware and all ABS parts. I do need all the Voron 2.4 Aluminum 3D Printer Parts. Is it possible to source all of the above from you or do I have to go out and hunt all the parts myself? Thanks. John

Add Response

Is it compatible with the : BIQU Hermit Crab Quick Change system ? BIQU H2 V2S Lite Revo Extruder ? Does it need or have an auto bed leveling system ?

View 1 Response

If I want a glass bed instead of a flexible PEI sheet, is that possible?

View 1 Response

Is the build process similar to Prusa?

View 1 Response

Will this work with rPi 3B or just rPi 4 series?

View 1 Response

What brand is the power supply?

View 1 Response

Ask a question about this product

Back to top
Enter Your Zipcode

View availability and shipping options for this product.