Thought3D Magigoo 3D Printer Bed Adhesion Solution - 50ml
Magigoo is your one solution for bed adhesion! Great 3D printer bed adhesion specifically created for PLA & ABS--easily remove 3D prints with no mess! Designed to address the most common problem found in FDM 3D printing technology occurring when the print detaches itself from the rest of the print.
| List Price: | $19.95 |
|---|---|
| Price: | $19.95 |
| Price: | $... |
| Availability: | In Stock |
| Order Now: | Ships Tomorrow |
Magigoo
This easy, no-mess solution was born from the frustration almost all 3D printer enthusiasts face; bed adhesion problems, 3D prints stuck to the bed, and warped first layers. The folks at Magigoo have created the easiest, no-mess product on the market to help you overcome all three of these problems! Not only will your 3D prints stick every time, there is no smell, it’s completely safe for the environment, and it cleans up quick and easy with only water or a damp cloth. You won’t need a spatula to remove your creations, and one 50ml tube will easily last you over 100 prints!
Non-Toxic and Odorless
The Magigoo stick won’t stink up your workspace with nasty chemicals.
Easy to Apply and Easy to Remove Prints
Just brush it on the bed, and let it dry. 3D Prints adhere tight, but removal is quick and easy.
Long-Lasting
You can get over 100 applications from one 50ml tube of Magigoo.
Use On Any Material
It doesn’t matter if you’re using PLA, ABS, PETG and more - Magigoo works for them all
Easy Clean-Up
Magigoo cleans up with just a damp cloth or water!
HOW TO USE
- Shake the bottle
- Apply to the desired area by pressing the nib on the bed (activates the inner valve)
- Print according to filament / printer manufacturer recommendation
- Allow to cool and remove. The print should pop right off
- Clean using a damp cloth
Questions
Is there a shelf life for this product?
Do you need a glass bed
Do you need a heat bed
Can this be used on a prusa mk3s smooth build plate? Always had lifting issue on the corners.
Keep getting samples of this from MatterHackers so decided to try one with MatterHackers Build PLA. It didn't work. Print lifted while printing and had to be cancelled, and the scrapped print popped easily off the warm bed. Didn't hold near as well as Elmer's glue stick.
Will this help if my prints won’t stick to the bed, or does this only help prints that stick too much? My prints won’t stick properly to the bed, and a few hours in sometimes they will pop off the bed, ruining the whole thing.
Will this work on my Ender 3 build plate or should I use a piece of glass over it?
Do it work best on a cold bed or a warm bed?
will this work on a pulse xe?
This really does work great with ABS, PETG, etc. but also read the fine print on the side that says "Use within 30 days of opening". That's also true. I did a run of ABS printing and it worked great for banging out a couple spools of ABS parts, but then suddenly it just stopped working AT ALL and I ended up tossing the last 1/5th of the bottle.
I'm from Malta and I have heard that it is from Malta if so is it better to buy it from somewhere else instead of the USA?
Will this work with bue painter's tape?
Does it work really well with abs? I spent $40 on 3dlac and abs still warps on the corners. The only think that really works well for me is abs juice. I just don’t like the shiny layer it leave on the bottom of my print.
Will this work with an SLA resin printer? If not, is there a similar product for that?
Will this work on the ultrabase print bed of anycubic I 3 mega?
does this work with NylonX
Will it work well on a PEI print bed?
Actually from Magigoo's website: "From our users we have learned that Magigoo is not only used as a glue, but also due to its easy release as a release agent on PEI sheets or other beds which over-adhere. For example PEI sheets when printing using TPUs or PET."
Magigoo will work on pretty much any common build plate!
It's designed for glass beds only. With PEI you shouldn't need additional adhesion methods. To strategize about ideal surfaces for a given filament, check out this article.