MakerBot MakerBot Method ABS-R Filament 5-Pack

MakerBot Method ABS-R Filament 5 Pack

ABS with superior printing reliability, performance, and ease of use.

ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts.

Works with RapidRinse™ Fast Dissolving Support

What's Included?

• (2) Black ABS-R Filament 
• (2) Natural ABS-R Filament
• (1) Red ABS-R Filament

Material Properties

Properties	Test	ABS-R
Tensile Strength (MPa)	ASTM D648	41
Tensile Modulus (MPa)	ASTM D648	2400
Strain at Yield (%)	ASTM D648	2.3
Strain at Break (%)	ASTM D648	33.4
Flexural Strength (MPa)	ASTM D790	79
Flexural Modulus (MPa)	ASTM D790	2600
Izod Notched Impact Strength (J/m)	ASTM D256	129 – C/H
Izod Unotched Impact Strength (J/m)	ASTM D256	970 - C
Heat Deflection Temperature – 64 psi  (C)	ASTM 648	105
Heat Deflection Temperature – 264 psi  (C)	ASTM 648	102

Technical Specifications:

SPOOL TYPE
Smart Spool provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.

DIMENSIONS AND WEIGHT
Spool Diameter: 21.8 cm (8.6 in)
Spool Width: 4.2 cm (1.65 in)
Material Diameter: 1.75 mm
Shipping Weight: 1.1 kg (2.4 lb)
Net Weight: 0.65 kg (1.43 lb)

STORAGE ENVIRONMENT
Store in the included vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.