MakerBot Tough Precision Print Pack Onyx Black

ENGINEERED FOR DURABLE AND STRONG 3D PRINTED PARTS

Featuring 2x the impact strength of ABS, MakerBot Tough Precision Model filament is engineered with industrial prototyping and manufacturing aid applications in mind. With tensile strength and flexural strength similar to that of ABS, Tough Precision goes a step further to address issues common with ABS prints – warping and curling. Demonstrating significantly less warping and curling than traditional ABS when printed without a heated build plate, Tough Precision Model filament allows users to print with the confidence that their parts will be accurate, durable, and easily machinable.

MakerBot Tough Precision Model Filament is extensively-tested for the highest reliability and measurably accurate parts.

MATERIAL DATA

• Glass Transition Temperature: 60-65°C (140-149°F)
• Melting Temperature: 150-160°C (302-320°F)
• Extruder Temperature: 210°C (419°F)

TOUGH PRECISION TECH SPECS

PRINTER COMPATIBILITY

• MakerBot Method
• MakerBot Method X

SPOOL TYPE

Smart Spool - provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print. A desiccant included in the spool maintains a low moisture level when spools are stored inside the material drawer bay.

SOFTWARE COMPATIBILITY

• MakerBot Print

DIMENSIONS AND WEIGHT

• Spool Diameter: 21.8 cm (8.6 in)
• Spool Width: 4.2 cm (1.65 in)
• Material Diameter: 1.75 mm
• Shipping Weight: 1.1 kg (2.4 lb)
• Net Weight: 0.75 kg (1.65 lb)

MakerBot PVA Precision Support Material has been extensively tested for the highest reliability, dimensional accuracy, and superior surface finish.

PRECISION PVA ENSURES FAST AND EFFORTLESS SUPPORT REMOVAL FOR YOUR MOST COMPLEX 3D PRINTS

PVA filament is your best choice when it comes to successfully printing complex 3D printed parts that require supports. Thanks to its low melting temperature of 170°C PVA is the perfect match for prints made from PLA, which has very similar printer settings. The only thing to keep in mind when printing with PVA is that it readily absorbs moisture, for the best results store MakerBot PVA in a vacuum seal container or the dry-sealed material bays of your Method or Method X 3D printer.

PVA PRECISION MATERIAL DATA

• Glass Transition Temperature: 60°C (140°F)
• Melting Temperature: 170°C (338°F)
• Extruder Temperature: 210°C (410°F)

PVA PRECISION TECH SPECS

PRINTER COMPATIBILITY

• MakerBot Method
• MakerBot Method X

SPOOL TYPE

Smart Spool - provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print. A desiccant included in the spool maintains a low moisture level when spools are stored inside the material drawer bay.

SOFTWARE COMPATIBILITY

• MakerBot Print

DIMENSIONS AND WEIGHT

• Spool Diameter: 21.8 cm (8.6 in)
• Spool Width: 4.2 cm (1.65 in)
  
• Material Diameter: 1.75 mm
  
• Shipping Weight: 0.8 kg (1.76 lb)
  
• Net Weight: 0.45 kg (1 lb)