Markforged Markforged High Temp Fiberglass CFF Filament - 150cc

Markforged's High Strength High Temperature (HSHT) Fiberglass is defined by two characteristics: high strength (nearly equal to 6061-T6 Aluminum) and strength in high temperatures. Though not as stiff as Continuous Carbon Fiber, Onyx parts reinforced with HSHT are strong at both low and high temperatures. As a result, HSHT reinforcement is best used for parts in high-temperature environments like molds, autoclaves, and others.

loading...
Product No. loading...

MARKFORGED HIGH TEMP FIBERGLASS CFF FILAMENT

High Strength High Temperature Fiberglass CFF™ (Continuous Filament Fabrication) Spools. High Strength, High Temperature (HSHT) Fiberglass is a material uniquely designed for users who need strong parts in higher temperature environments (over 105°C, with a heat deflection point of 140°C). This capability is critical for the automotive and aerospace industries where load bearing parts are continually expected to withstand higher temperatures.

High Strength High Temperature (HSHT) Fiberglass is defined by two characteristics: high strength (nearly equal to 6061-T6 Aluminum) and strength in high temperatures. Though not as stiff as Continuous Carbon Fiber, Onyx parts reinforced with HSHT are strong at both low and high temperatures. As a result, HSHT reinforcement is best used for parts in high-temperature environments like molds, autoclaves, and others.

BENEFITS OF MARKFORGED HIGH TEMP FIBERGLASS CFF FILAMENT

  • High Strength High Temperature (HSHT) Fiberglass exhibits aluminum strength and high heat tolerance.
  • Five times as strong and seven times as stiff as Onyx
  • Best used for parts loaded in high operating temperatures.

WHAT APPLICATIONS IS HIGH TEMP FIBERGLASS CFF FILAMENT SUITABLE FOR?

  • Polymer Molds
  • Prototype (Low-Run) Injection Molds
  • High-Temperature Fixturing
  • High-Temperature Prototypes

WHAT 3D PRINTERS IS HIGH TEMP FIBERGLASS CFF COMPATIBLE WITH?

  • FX20™
  • X7™
  • Mark Two™

TECHNICAL SPECIFICATIONS:

  • Filament Weight: 50cc or 150cc
  • Flexural Strength: 420MPa
  • Heat Deflection Temp: 145ºC
  • Material Data Sheet
Back to top