MicroSwiss Micro Swiss Direct Drive Extruder for Creality Ender 5 with Hotend
The Micro Swiss All Metal Dual Drive Extruder and Hotend is a high-performance upgrade for your Creality 3D printer, allowing you to print with a wider range of materials including high-temperature filaments. The dual drive system ensures reliable performance, while the PTFE liner in the hotend protects against overheating.
- Dual drive system for increased grip
- CNC machined teeth for maximum durability
- Hotend opening for high-temp materials
Price: | $99.75 (with add-ons) |
---|---|
Availability: | Only 3 left in stock. |
Order Now: | Ships Tomorrow Free U.S. Shipping |
Print with a variety of 3D printing filaments from PLA to flexibles
Enhance the performance of your Creality 3D printer with the Micro Swiss All Metal Dual Drive Extruder and Hotend. Featuring a dual drive system with hardened steel drive gears and CNC-machined teeth for maximum grip, you will have a peace of mind printing anything from PLA to flexible filaments like TPU.
A Hotend opening up true possibilities in 3D printing
You've set up your Creality, now it's time to take it to the next level! With the Micro Swiss Direct Drive Extruder and Hotend your Creality3D printer can print with high-temperature materials like Polycarbonate and Nylon - Even though it has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. This configuration also eliminates Hotend meltdown failures that are common with PTFE designs. Print all kinds of high-temp materials using your Creality3D printer: Nylon, TPU, ASA, PETG, polycarbonate, and polypropylene. You can also upgrade further by installing a Hardened Steel Nozzle, allowing you to print abrasives such as NylonX and NylonG.
What's included in the box?
- Micro Swiss All Metal Hotend (if ordered with Extruder + Hotend)
- Main Extruder body
- Extruder Lever
- Spring Pin
- Spring
- 2 x Gears
- Knob
- Shoulder Pin
- 2 x M5 20mm Nylon Patch Bolts
- M5 30 Bolts
- M5 Nylon Lock Nut
- M5 Washer
- Extension Cable
- 3 x M3 Motor Mounting Screws
- 2 x M3 Bolts
- 2 x M3 Nuts
- 5 x Zip Ties
- Printed Bracket
- Beveled Capricorn Liner
Disclaimer: Stepper motor and roller wheels are NOT included!
For more information on how to install Micro-Swiss Direct Drive Extruder for Creality3D Ender 5
Questions
Does this kit exclude the titanium thermal break?
MicroSwiss recommends that the temperature be raised 5-10C. Does that mean that I could be above the recommended temperature for a specific filament? Why do they recommend this?
"Disclaimer: Stepper motor and roller wheels are NOT included!" Heater cartridge is not included either.
It seems like this will add too much weight and inertia to the X and Y axis. I really like the precision I get with the MakeIt Pro, but putting direct drive on my Ender 5 pro seems like it will help with a cleaner print, due to precision retraction, etc. Have you compared the precision before and after the conversion? Thank you.
Will this work for the Ender 6? I thought I read somewhere that it would
I have an ender 5 plus. do you have a diagram or photos of a converted product?
will this work on the tronxy x5sa?
How much total weight is added to the hot end assembly with this direct drive extruder?
How much more clearance is needed above the printer for feeding filament? Will I need to increase the height of my enclosure?
Are there any Hotends to avoid, when using this extruder? Or do the all fit? (obviously a newbie!) Thanks.
Will this work with an ender 5 Pro?
Would this product work on an Ender 5 Plus?
Yes it does. And I'll add that my Ender-5 Plus now heats and prints far better than with the stock Bowden setup.
Yes it does.