Micro Swiss Micro Swiss NG REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
The Micro Swiss NG™ REVO Direct Drive Extruder is a lightweight, high-quality extruder designed for 3D printers, featuring a 3:1 gear ratio, hardened steel dual-gear drive, and seamless integration with the E3D Revo Hotend. It enables fast nozzle swaps, easy installation, and is adaptable to a wide range of 3D printers
- Lightweight with 3:1 gear ratio for improved performance
- Hardened steel dual-gear drive for reliability and precision
- Seamless integration with E3D Revo Hotend for easy nozzle swaps
| Price: | $149.99 (with add-ons) |
|---|---|
| Availability: | In Stock |
| Order Now: | Ships Tomorrow Free U.S. Shipping |
Technical features of the Micro Swiss NG Revo
- Gear Ratio: 3:1 for improved torque and precision
- Drive Gears: Hardened steel, precision-cut dual gears for reliable and consistent filament feeding
- Compatibility: Adaptable to a wide range of 3D printers, including CR-10 and Ender 3 series
- Extruder Mount: Low overhang extruder mount enabled by the bevel gear system
- Hotend: Designed for seamless integration with the E3D Revo Hotend for fast and easy nozzle swaps
- Installation: Solderless, crimpless, butt splice connectors for easy heater cartridge and thermistor connections
- Time Required: Approximately 30 minutes for installation, with no firmware modifications needed
Please note that these specifications are subject to change based on the specific model or version of the Micro Swiss NG™ REVO Direct Drive Extruder. Always consult the manufacturer's documentation for the most accurate information.
NG REVO Creality CR-10 / Ender 3 Printers Compatible with the following :
- CR-10
- CR-10s
- CR-10-S5
- CR-10-S4
- Ender 3
- Ender 3 Pro
- Ender 3 V2
- Sunlu S8
- Sunlu S8 Pro
NG REVO Creality Ender 5 / 5 pro / 5 plus Printers Compatible with the following :
- Ender 5
- Ender 5 Plus
- Ender 5 Pro
What's included in the box
- 1x Master Extruder Assembly
- 1x Adaptation plate
- 1x LDO Stepper motor
- 1x Fan Shroud
- 1x Custom extension cable
- 3x Printed Brackets
- 1x Revo Hotend assembly
- 1x Revo HeaterCore 24V
- 1x Revo HeaterCore Spring
- 1x 0.40mm Brass Revo Nozzle
Hardware:
- 1x Eccentric nut
- 1x M5 x .8 x 30mm CAP SCREW
- 1x 5mm ID 10mm OD Washer
- 1x M5 x .8 Nylon Lock Nut
- 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs
- 4x M2.2 x 8mm Thread Forming Screw for Plastic
- 4x M3 x 12mm Thread Forming Screw for Plastic
- 5x Zip Ties
- 4x butt splice connectors
Questions
Does this kit exclude the titanium thermal break?
Does this work with ender 5 s1 have the sprite extruder currently
MicroSwiss recommends that the temperature be raised 5-10C. Does that mean that I could be above the recommended temperature for a specific filament? Why do they recommend this?
"Disclaimer: Stepper motor and roller wheels are NOT included!" Heater cartridge is not included either.
It seems like this will add too much weight and inertia to the X and Y axis. I really like the precision I get with the MakeIt Pro, but putting direct drive on my Ender 5 pro seems like it will help with a cleaner print, due to precision retraction, etc. Have you compared the precision before and after the conversion? Thank you.
Will this work for the Ender 6? I thought I read somewhere that it would
I have an ender 5 plus. do you have a diagram or photos of a converted product?
will this work on the tronxy x5sa?
How much total weight is added to the hot end assembly with this direct drive extruder?
How much more clearance is needed above the printer for feeding filament? Will I need to increase the height of my enclosure?
Are there any Hotends to avoid, when using this extruder? Or do the all fit? (obviously a newbie!) Thanks.
Will this work with an ender 5 Pro?
Would this product work on an Ender 5 Plus?
Yes it does. And I'll add that my Ender-5 Plus now heats and prints far better than with the stock Bowden setup.
Yes it does.