Sorry, this product is currently unavailable

Alternative products you may be interested in:

3DVerkstan Olsson Ruby Nozzle - 2.85mm x 0.80mm

Developed for lab use 3D printing with extremely abrasive filaments, the Olsson Ruby 3D printer nozzle is the most wear-resistant nozzle on the market. Capable of extruding upwards of 8kg of carbon fiber filament with zero signs of wear, no filament is too tough for the Olsson Ruby.

List Price: $90.00 (with add-ons)
Availability: Currently Unavailable
Add to wishlist
Available Add-ons (2)
Price $58.00 $58.00 View Addon »
Price $64.00 $62.00 View Addon »
Product No. M-RSV-YZPZ
Nozzle Size: 0.80mm
0.40mm
0.60mm
0.80mm
Filament Diameter: 2.85mm
1.75mm
2.85mm

Print endless amounts of abrasive filament

Born from the same demanding lab that gave us the Olsson heater block, the Olsson Ruby 3D printer nozzle is the most wear resistant nozzle available. Developed for use while printing extremely abrasive Boron Carbide filament, the Olsson Ruby prints kilograms of even the most abrasive consumer filaments with no visible signs of wear.

Why the Olsson Ruby is right for your 3D printer

  • One nozzle for any material. While the Ruby has been developed for use with highly abrasive materials, it also produces beautiful 3D prints with less abrasive materials such as PLA, ABS or Nylon
  • The ruby embedded in the tip of the nozzle will not wear down when printing even the toughest materials. Designed for use printing Boron Carbide, the third hardest known material in the world.
  • The main body of the Olsson Ruby is brass, which means excellent heat conductivity throughout the nozzle to maintain consistent temperature.
  • The ruby nozzle has been in field testing since early 2016 and the community has produced stunning prints using this nozzle
  • Each Olsson Ruby nozzle is manufactured, assembled and testing at their high-quality facility in Sweden. By controlling their process and keeping it close to home they can guarantee the best quality and tight tolerances on each and every nozzle.

Perfect for printing NylonX

Author of the OpenRC Project, the OpenRailway Project and designer of the Benchy, Daniel Norée has found great success printing many of his designs with the Olsson Ruby nozzle and MatterHackers NylonX filament.

Daniel describes his experience printing NylonX with the Olsson Ruby:

”Other than being a high precision product the Olsson Ruby offers great value when iterating a project like the OpenRC Mini Quad and need that long time consistency in quality as it won't degrade over time nearly as much many of it´s competitors when printing abrasive filament like the NylonX.”

The Olsson Ruby is an excellent nozzle for printing MatterHackers NylonX carbon fiber infused nylon filament. NylonX produces super strong parts, but can quickly wear out a standard brass nozzle. The strength and abrasive resistance of the Ruby nozzle enables makers to print kilograms of carbon fiber filament with zero signs of wear on the nozzle.

Is My 3D Printer Compatible?

This Olsson Ruby has M6x1 external threading and a 7mm shaft, making it compatible with many popular 3D printer manufacturers as well as any printer with an E3D v6 HotEnd installed. Some of these printers include:
 
2.85mm
  • Ultimaker 2+ / 2+ Extended
  • Ultimaker 2 / 2 Extended with Olsson Block upgrade
  • Lulzbot TAZ 5
  • Lulzbot TAZ 6 **
  • Lulzbot Mini **
  • Any printer with an E3D v6 3.00mm hotend*
 
1.75mm
  • Any printer with an E3D v6 1.75mm hotend*
  • Prusa Research i3 MK2
  • Makerbot Replicator 2/2X
  • Robo3D R1+
  • SeeMeCNC Rostock MAX V3
  • OpenBeam Kossel Pro
  • MAKEiT Pro
 
*Olsson Ruby will need to be mounted with the nozzle placed against the heat break/isolator to create a seal, and not against the front face of the heater block.
**Any printer with conductive automatic bed leveling, such as the LulzBot TAZ 6, will need to have the auto leveling disabled as the ruby tip is not conductive.

Questions View All Responses

I am interested in printing with filament with metal in it which can be more abrasive. I have a snapmaker 2.0 and was interested if this is compatible. Snapmaker uses a MK8 with an M6 thread... and a 0.4mm nozzle.

Add Response

is this compatible with the ender 3 pro?

View 1 Response

Does this fit Tronxy x5sa pro

Add Response

Will this fit in the cr6-se?

Add Response

Will this work in a Flashforge Creator Max Dual Extruder

Add Response

snapmaker 2.0

Add Response

Will this nozzle work on my ender 5 plus?

Add Response

Hello! Is this ruby-tip nozzle compatible with the Raise3D Pro 2 and Pro 2 Plus printers? Your response would be greatly appreciated.

View 1 Response

I need a ruby nozzle for Geeetech A10T .4, 1.75mm filament M7 outer thread . Do you have one? can I have one made? thanks.

View 1 Response

Will it work with a Snapmaker 2.0

Add Response

Will this work with the Monoprice Mini Delta IIIP (V4.1)

Add Response

Will this work with the Monoprice Mini Delta IIIP (V4.1)

Add Response

What is the max printing temperature with this nozzle?

Add Response

Why does this nozzle not work with a 3D45 when it's the same thread pitch, same filament size, and same thread size?

Add Response

Will this nozzle fit on to MendelMax 3 printer?

View 2 Responses

Does this work on a Prusa i3 MK3S

View 1 Response

Will this work with the FlashForge Guider 2S

View 1 Response

Same happen here , after some small prints the Ruby disapair , i just wrotte to Matterhackers for replacement under warranty, i own 2 PULSE XE Printers , how long does this nozzles are supposed to last ?

View 1 Response

Is there a warranty on the nozzle? After less than 10 small prints with NylonX, the ruby is no where to be found.

View 1 Response

Will the 1.75 nozzle work with the Creality Ender 5?

View 1 Response

Is this compatible with the Anycubic 4Max Pro?

View 1 Response

Will this work with dremel 3D45?

View 5 Responses

Would I be able to use this nozzle on a Monoprice MP Select Mini Pro?

View 1 Response

It seems the shorter nozzle in this range would be compatible with the Mosquito hot ends. Can you confirm this?

View 1 Response

Does this work with the Xyz da vinci jr 1.0 pro?

View 1 Response

Is it compatible with the Dremel 3d45

View 1 Response

will this nozzle work with formbot raptor 2.0 that has a ed3 v6 all metal hotend

View 1 Response

Will this nozzle work with Raise3D N2 plus?

View 1 Response

Will the Olsson Ruby work with the ARTEMIS 300 RTP™ printer?

View 1 Response

Will the Olsson Ruby work with Mass Portal PharaohED?

View 2 Responses

Does this work with any of the qidi 3D printers

View 2 Responses

Can this nozzle be installed on a Flashforge finder 3d printer?

View 1 Response

Does this work in the Ultimaker s5 print core

View 2 Responses
Load 6 more questions

Ask a question about this product

Back to top