Onefinity Onefinity PRO Series Foreman CNC Machine - Basic Bundle
The Onefinity Foreman PRO CNC Bundle is designed for hobbyists and small businesses, featuring powerful stepper motors, a heavy-duty Z-slider, and high-precision linear motion shafts. It includes a 10.8” touch display, wireless Joy Pad, Touch Probe, 1/4" bit, and a one-year Carveco Maker subscription. Key features include a 48.1" x 48.1" x 6.25" cutting area, 65mm spindle compatibility, and robust construction for reliable performance. Made in Canada, each machine is tested and inspected before shipping.
- Cutting Area: 48" x 48"
- Affordable & accessible entry into CNC
- No computer required for operation
Price: | $44.41 (with add-ons) |
---|---|
Availability: | Out of Stock Notify Me |
Est. In Stock: Jan 1st |
Onefinity Foreman PRO CNC Bundle
POWERFUL CNC MADE ACCESSIBLE
The Onefinity Foreman PRO is the ultimate CNC machine for hobbyists and budding small businesses, featuring powerful stepper motors, a heavy-duty Z-slider, and high-precision linear motion shafts. Its user-friendly design includes a 10.8” touch display, plug-and-play wiring, and a wireless Joy Pad for easy positioning. Enjoy quick setup and unparalleled accuracy, free Touch Probe, Joy Pad, 1/4" bit, and a one-year Carveco Maker subscription for a limited time.
Key Features of the Onefinity PRO Series Foreman CNC Machine Bundle:
- Cutting Area: 48 1/8" x 48 1/8" x 6 1/4"
- Affordable entry into CNC machining
- Powerful precise components for reliable performance
- 65mm Spindle compatibility (inquire for the 80mm mount)
- Included- Onefinity Controller & 10.8" HD Display
- No computer required
- Made in Canada
Precise, Rigid Performance
Onefinity Foreman PRO delivers accurate, precise CNC machining. Built to be a powerhouse for hobbyists and small businesses, Foreman PRO utilizes the following components for an elevated CNC experience:
- Hardened steel linear motion shafts
- Sealed, high-load bearings
- Quality ball screws on all axis
- Powerful stepper motors
- Drag chains for organized, protected cables
Each machine is fully inspected, tested, and packed with its successful test carve before leaving the factory for guaranteed quality assurance upon delivery to your doorstep.
Quick & Easy Operation
CNC machining is fast and user-friendly with the Onefinity Foreman PRO CNC machine. Only partial assembly is required for a quick setup of less than an hour. Once you're up and running, operation is easy with the included 10.8" HD Display and Onefinity Controller which eliminates the need for a tethered computer. Additional convenient features include:
- Wireless motion control w/ included Joypad
- Homing is automated with included 3-Xis Touch Probe
- Auto squaring ensures complete square at 0 when homing
- Micro Tramming allows easy shimming of your CNC
- Included Dust Boot contains dust for easy cleanup
- and more!
Build-Your-Bundle
No two CNC users are alike. That's why Onefinity PRO Series machines start with the basic components with room to add other accessories that match your application and budget needs. Choose our carefully curated Starter or All-in-One bundles for a worry-free, quick checkout, or start from scratch with our Basic bundle and build it to your specs with optional accessories.
- Basic - Source the basic parts
- Starter - Source everything* needed to get started
- All-in-One - Source everything* needed to get started with additional items for an optimized CNC experience
*Wasteboards are NOT included with any Onefinity PRO machine and must be self-sourced. Only the Starter and All-in-One bundles come with a frame/fixed stand to which waste boards can attach.
What's Included with the Onefinity PRO Series Foreman CNC Machine Bundle?
Bundle | Items |
Basic Bundle | 1 × Onefinity PRO Series Foreman CNC Machine 1 × Control Box 1 × 10.8" HD Display 1 × Wireless Joypad 1 × XYZ Touch Probe 1 × Dust Boot (Basic) 1 × Bits & Bits 1/4" Down Cut Bit 1 × CarveCo Maker Subscription (1 Year) |
Starter Bundle | 1 × Onefinity PRO Series Foreman CNC Machine 1 × Control Box 1 × 10.8" HD Display 1 × Wireless Joypad 1 × XYZ Touch Probe 1 × Dust Boot (Basic) 1 × Bits & Bits 1/4" Down Cut Bit 1 × CarveCo Maker Subscription (1 Year) 1 × Makita Router 1 × Myers Woodshop Bit Set 1 × Onefinity Foreman QCW Frame (Secure from Beneath) |
All-in-One Bundle | 1 × Onefinity PRO Series Foreman CNC Machine 1 × Control Box 1 × 10.8" HD Display 1 × Wireless Joypad 1 × XYZ Touch Probe 1 × Dust Boot (Basic) 1 × Bits & Bits 1/4" Down Cut Bit 1 × CarveCo Maker Subscription (1 Year) 1 × Makita Router 1 × Myers Woodshop Bit Set 1 × "The Jenny" Infinite Possibilities Bit Set 1 × Two Moose Design Bit Set 1 × Onefinity Jtech 7W Pro Laser 1 × Onefinity Foreman QCW Fixed Stand (Secure from Beneath) |
What Accessories/Add-On's go with the Onefinity Foreman PRO?
Makita Compact Router | |
Onefinity machines are built to work with this exact Makita Router model (model RT0701C) | |
LaunchPad CNC (1-hr Expert Assistance) | |
Video chat 1-hour with one of our MatterHackers Pro's and get answers to any burning questions you may have about CNC machining. | |
QCW Frame (Beneath Version) | |
Provides a solid base for your Onefinity. Wasteboards can be attached from below the frame. This does NOT come with a wasteboard. This is the easiest and cheapest to set up between the Beneath and Above versions. Please watch this installation video to determine if you are comfortable with this setup before purchasing. Note the first half of this video is what the initial setup will be like. Replacing the wasteboard after you have the machine attached to the frame will follow the second half of the video's installation tutorial. You may be able to avoid the lifting required when the machine is attached with the Fixed Stand since the bottom of the frame is accessible with this setup. | |
QCW Frame (Above Version) | |
Provides a solid base for your Onefinity. Wasteboards can be attached from above the frame. This does NOT come with a wasteboard. This is the more complex and expensive set up between the Beneath and Above versions. Please watch this installation video to determine if you are comfortable with this setup before purchasing. Note the perk of the Above version is that it does not require as much lifting of the machine when attaching/ replacing wasteboard slats as the Beneath version since installing from above is more accessible. However, the complexity of having to drill precise holes every time you install a slat may not be worth that convenience to you. | |
QCW Fixed Stand (Beneath Version) | |
Provides a solid base for your Onefinity. Wasteboards can be attached from below the frame. No table is required as the included legs allow this to be freestanding. Freely fit items under the machine. This does NOT come with a wasteboard. See the QCW Frame accessories to understand the differences between the Beaneth and Above versions. | |
QCW Fixed Stand (Above Version) | |
Provides a solid base for your Onefinity. Wasteboards can be attached from above the frame. No table is required as the included legs allow this to be freestanding. Freely fit items under the machine. This does NOT come with a wasteboard. See the QCW Frame accessories to understand the differences between the Beaneth and Above versions. | |
Myers Woodshop Bit Set | |
Starter bit/cutter set used and recommended by Myers Woodshop. Manufactured in USA. Kit Includes: 1/4" Shank x 2-1/2" OAL - Engraving Router Bit 60° 1/4" Shank x 2-1/2" OAL - 1/16" DownCut 2 flute spiral - 3/16" cut length 1/4" Shank x 2-1/2" OAL - 1/8" DownCut 2 flute spiral - 1" cut length 1/4" Shank x 2-1/2" OAL - 1/4" UpCut 2 flute spiral - 1" cut length | |
"The Jenny" Infinite Possibilities Bit Set | |
Bit set created and tested by Cody of Cody's CNC Engraving. Manufactured in USA by Bits & Bits. This gives you the desired result of a standard compression bit without a deep depth of cut. These bits are made of solid carbide. Tool life of these bits are increased by up to 3X with Zirconium Nitride (ZrN) coating. Kit Includes:
| |
Two Moose Design Bit Set | |
Starter bit/cutter set used and recommended by Two Moose Design. Manufactured in USA by Bits & Bits. Kit Includes: 3/4" Cutting Diameter Bowl bit 1/4" Shank x 2-1/2" OAL - Engraving Router Bit 90° 1/4" Shank x 2-1/2" OAL - 1/8" DownCut 2 flute spiral - 1" cut length 1/4" Shank x 2-1/2" OAL - 1/4" DownCut 2 flute spiral - 1" cut length | |
Jtech 7W Pro Laser | |
Easy all-in-one laser and mounting kit specifically for Onefinity CNC machines. No additional accessories required to start laser engraving / cutting on your Onefinity. 14W, 24W, and 44W versions are available, but will require an air assist and/or air pump before use. They are not included and must be self-source. Reach out to support@matters.com if interested and okay with self-sourcing the other items. |
What are the Technical Specifications of the Onefinity PRO Series Foreman Bundle?
GENERAL | |
---|---|
Machine | CNC Machine |
Assembly | Semi-Assembled |
Made In | Canada |
Approximate Weight | 210lbs |
DIMENSIONS | |
Machine | A: 61 - 3/8" B: 53 - 3/4" C: 5 - 1/2" D: Adjustable: 4 - 3/32" or 5 - 7/16" Depth (not including display) 61 - 3/8" See diagram above Tech Specs table. |
Cutting Area | X Axis: 48- 1/4" Y-Axis: 48- 1/4" Z Axis: 5 - 1/4" |
MACHINE | |
Rapid Rate* | X Axis: 400 inches/min (accel 750 km/min2) Y Axis: 400 inches/min (accel 750 km/min2) Z Axis: Z-20 = 275 inches/min (accel 750 km/min2) / Z-16 = 118 inches/min (accel 750 km/min2) |
Accuracy1 | .005" - .001" |
Homing Accuracy | Up to 1mm |
Microstepping | Up to 256 |
Steps per Second | 250K (on each motor output) |
X & Y Axis | 16mm Ball Screws |
Z Axis | 12mm Ball Screws |
All Axis | Chrome plated, hardened steel linear shafts |
Z-Slider | Z-20 Heavy Duty |
Motor Driver | 4-Channels |
Router Compatibility | Makita Router Model No: RT0701C (SEPARATE Purchase) |
Dust Boot | Included |
Wasteboard | NOT Included |
Quick Change Wasteboard (QCW) Frame | OPTIONAL Purchase |
Display | 10.8" HD Touch Display |
XYZ Touch Probe | Included |
Wireless Joypad | Included |
Control Box | Included; Buildbotics Open-Sourced CNC Controller |
On/Off Switch | Yes (with Control Box) |
Emergency Stop Switch | Yes (with Control Box) |
Computer Required | No; Control and configure from your web browser |
Drag Chains | Yes |
Set-up Time | <1 hour |
Connectivity | Wired (ENet) or wireless (WiFi) networking |
Quick Connect Wiring | Yes |
USB Ports | 4 |
Smooth S-curve Acceleration | Yes |
2 Switched Load Outputs | Yes |
WARRANTY | |
Warranty Period | 12 Months, see Manual for details |
* These are stock settings and in most cases can be increased.
1 This is the expected accuracy. Many outside factors can affect this.
FAQ
Do any of the Onefinity PRO Series machines include a wasteboard and frame to attach the wasteboard?
No, these are two separate purchases.
What waste board do you recommend purchasing?
Onefinity recommends 3/4'" MDF. The size will depend on the machine you purchased and your setup.
Do you sell wasteboards?
No. Please source a wasteboard from your local retailer such as Lowes, Home Depot, etc.
Where can I buy a frame to attach the wasteboard?
Onefinity sells a variety of frames to attach your wasteboards. See the Accessories section for options.
Can I use the Onefinity Wall Mount System to hang up the Onefinity Foreman PRO?
No, the Onefinity Foreman PRO is too heavy to safely and successfully operate/hang this machine. If you want the convenience of this Wall Mount System, consider the Woodworker PRO or Journeyman PRO instead.
Can I use the Onefinity Rolling-Folding Stand Leg Kit with the Onefinity Foreman PRO?
No, the Onefinity Foreman PRO is too heavy to safely utilize the unfolding method with the kit. If you want the convenience of this Rolling-Folding kit, consider the Woodworker PRO or Journeyman PRO instead.
Do any of the Onefinity PRO Series machines include a router?
No, that is a separate purchase.
What router can I use with the Onefinity PRO Series machines?
The configuration MatterHackers has available is the 65mm spindle mount, which is compatible with the Makita 1-1/4 HP Compact Router (model RT0701C).
Can I use an 80mm Spindle with the Onefinity PRO Series machines?
The optional 80mm Spindle Mount (separate purchase) is required to use an 80mm Spindle (self-source).
Is there anything I should know about using an 80mm Spindle on a Onefinity PRO Series machine?
A "Spiffy" (3rd X-Rail) is HIGHLY recommended if using an 80mm Spindle. Contact support@matterhackers.com if interested.
- A "spiffy" is highly recommended with an 80mm Spindle for a higher guarantee of success with the CNC machine. Due to the weight of 80mm Spindles, there is the possibility that the Z-Axis may drop when powering down or using the Emergency Stop. This may be amplified when adding a Spindle Mounted Dust Shoe.
Should I get the Makita router or a dedicated spindle?
The Makita Router is strongly recommended if the cost and/or complexity of setting up a VFD spindle is not within your capabilities.
Is support offered for spindles?
Support is not offered for Spindles. You will need to get support from the Spindle Manufacture if adding a Spindle.
Does Onefinity have a forum of fellow Onefinity users?
Yes! You can find knowledgeable, like-minded Onefinity CNC users here.
Do you have any resources on how to assemble my Onefinity PRO Machine?
Check out this assembly video.
RETURN TO TOP OF PAGE
Questions
Can you print pla without glue on this surface?
Not a question: I just wanted to say that this garolite sheet is awesome. I've been printing on PEI exclusively pretty much ever since I got my printer 9 months ago. I recently started printing PETG and decided to see if there was any other build surface that would have the same amount of adhesion without taking a part of the surface with it when I removed the part. This stuff fits the bill perfectly. Just as good adhesion as PEI with an easier ability to remove the part with the plus that the bottom surface is shiny like glass rather than matte like PEI. Stick this onto the bottom of a flexplate and you'll never look back!
Hi what size do I need for my prusa mk3s?
Can an Ultimaker S7 Sheet be added? Or should the S5 details be updated to include the S7? Is it also compatible? Also, it states that glass is required for the thin sheet and not required for the thick sheet. I have a metal flex plate included with the S7, so which would be needed?
Nylon G sticks almost too well. Had to really really fight to get it off. Any suggestions on a release agent? Plain PVA glue?
Is is possible to GAROLITE BUILD SURFACE in a 410x410mm size? I have a RatRig 400 and would love to get one for it
Is there a worldwide shortage of G10 or something? Many of the ones I want have been out of stock for like a year
Most layerlock garolite surfaces are out of stock with an estimated restock date of January 1. Since it is may 2023, should we expect restocking to occur in January of 2024?
Will Prusas pinda probe still work with garolite applied?
There was an error with the Z access and the nozzle slightly dug into the printbed (Id say maybe .05mm into the bed or pressure on the bed) leaving a trace and a lighter shade/white residue almost on the bed and I fear may be permanent damage any suggestions on restoring/cleaning the bed? (Was printing with PLA Ex-205 Bed-75 )
Any reason why the thick buildplate is not available for the ultimaker s3?
How thick are the plates?
Why no buildplate compatible for the Ultimaker S3!? I hope its just out of stock, for now I'm buying the S5 and cutting it on the table saw.
Interested to get the ender 3 version....Does it come with the adhesive on one side? I am looking to just sit it on top of the magnetic part of a pei bed (so that I can switch between the two) so ideally it is without adhesive. also do you have uk stockists?
Can this be adhered to a Buildtak flexible sheet so it's easy to pop off the bed with the Buildtak system (or similar system)?
How do I remove the LayerLock Garolite Build Surface 9" x 10"?
How well does this keep its form? I mean does it warp easily? I bought gasoline just like this from ebay that was half inch thick and that thing worped in the middle like crazy once it got heated.
Can I order a sheet of 350mm x 350 mm (or slightly larger)?
I have a very large bed that is 500mm x 500mm (19.68in). Is there a custom or oversized version that I can by and cut to fit?
I need a sheet that is 16x16 in, are these sheets the same as the Halogen-Free Garolite G-10 or Multipurpose Flame-Retardant Garolite G-10/FR4 from McMaster-Carr?
The Ender 5 Pro uses a dual magnet build plate (both glass plate and build surface are magnets). Can this be adhered to the top of the flexible magnetic build surface?
Can I print Polycarbonate on this?
Can I print TPU straight to bed without any glue sticks?
Is there a size that is pre-made to fit the prusa i3 mk3s? If not, what is the recommendation for making one of these sheets fit on a prusa and work with their magnetic bed system?
So the email says the 9.25" x 9.25" is back in stock but the web page will not permit me to add it to the cat=rt. What gives?
How well does this work with ABS?
Can this be mounted to a spring steel plate that can be flexed for easy part removal?
I have a 12 x 12 magnetic build plate system. One plate is pei and another is build Tak. Do you sell 12 x 12 flexible steel that I can attach this to?
When applied to the glass, does this material work with Ultimaker S5 auto-leveling or do you have to switch to manual leveling? I intend to have two glass plates to switch between... one with PEI and one with this Garolite but I want to retain auto-leveling if possible, to avoid having to swap between different startup G-code sequences, etc. Thanks!
Can this material be machined? And if so what would you recommend it be coated with for extra protection
When replacing this sheet, can it be applied to another used sheet of garolite or should the previous be removed before placing the new one?
Hi, is this a MatterHacker original product or is it made by someone else? I'm based in the UK and would like to buy this but the international shipping is prohibitive, is there a UK (or EU) based reseller?
Can this be applied over PEI? I have an old Prusa Mk3 PEI spring steel sheet with smooth PEI that I would like to use but don't want to remove the PEI film if possible.
I have a similar build plate on one of my machines. I flipped the spring steel sheet over and attached the Garolite to the opposite side. Now I can use either surface to print on.