Raise3D Fillamentum Turquoise Green Extrafill ABS - 2.85mm (0.75kg)
Raise3D Industrial PA12 CF is a carbon fiber reinforced composite filament material based on Nylon 12. This material's outstanding strength-to-weight ratio makes it a suitable replacement for metal when manufacturing certain lightweight components!
Price: | $45.00 (with add-ons) |
---|---|
Availability: | Only 2 left in stock. |
Order Now: | Ships Today Free U.S. Shipping |
RAISE3D INDUSTRIAL PA12 CF FILAMENT:
Raise3D Industrial PA12 CF is a carbon fiber reinforced composite filament material based on Nylon 12 (Polyamide 12). Industrial PA12 CF is reinforced with short carbon fiber giving it excellent rigidity, strength, heat resistance, low warpage, and low water absorption. This material’s outstanding strength-to-weight ratio makes it a suitable replacement for metal when manufacturing certain lightweight components.
BENEFITS OF RAISE3D INDUSTRIAL PA12 CF FILAMENT
Thanks to the reinforcement provided by short carbon fibers, this material exhibits the following qualities:
- Excellent Rigidity and strength
- Heat resistance
- Low warpage
- Low water absorption
- Outstanding strength to weigh ratio, making it a suitable replacement for metal parts in the manufacturing of lightweight components.
TECHNICAL SPECIFICATIONS:
- Diameter: 1.75mm
- Color: Black (PMS: Black 6U/ RAL: 9004)
- Drying recommendations: Dry PA12 CF at 80°C for 12 hours before printing, moisture content is crucial for final printed part quality.
- Nozzle: Abrasion of the brass nozzle happens frequently when printing PA12 CF. Using an abrasion resistant nozzle,
such as hardened steel and ruby nozzle, is highly recommended. - Annealing: it is recommended to anneal the model in the oven at 80°C for 6-8 hours.
Questions
Which style thermistor is included in this kit? Cartridge or the little glass ball?
Will this fit the MP mini V2? How long are the wires and what are the terminal types?
Can I print PETG (235-255C)?
Are there any upgrades that could allow this extruder to work above the 240 degree limit without causing any damage, such as all-metal heatsinks?
Will it bolt up to an ANET A8 without issues?
Do you know it this will fit in my Robo 3D r 1 plus ?
Will this work with ender 3?
Is this compatible with Printrbot simple metal?
I purchased one in 2015 (part No 44517002 for DiVinci printer). Now want to use it on Hictop Prusa i3 (with Marlin firmware). Is the one I have 12v or 24v?
In Marlin firmware, what temperature table should be used with the 100K Semitec 104GT2 NTC thermistor? I've seen many sites and forums say to use table 5, but I find the temperature at the nozzle (checked with K-type thermocouple)to be between 4 and 15 degrees lower than what the printer says it is when using temp table 5.
I notice that under the Electronics column, heating wires are not included. Is this true? Also, there an installation manual I can download?
Does this fit a cr10s
Doea it come fully assembled?
Hi, do you guys match prices with filastruder? I'm interested in ordering a couple lite6 hotends. Thanks
The Original Prusa i3 MK1 says it comes with an E3D Lite. Is this the same hot end?
Does this come with a 12v or 24v fan?
i am trying to set it up with my prusa I3 and the thermistor is reading craz temps, what other type of themistor did you use in the past?
Does it Include the PTFE tubing? I dont see it on the included list
Why, after removing Teflon tube , is it so difficult to replace.
Does the E3D lite hot end fit a Oneup 3d printer?
Does this fit a Robo R1 3d printer?
What size nozzle comes with this?
Does it include a thermistor plus wiring to it?
Does it include a fan, shroud or nozzle?
Is this 12v or 24v?
Is the Lite6 the same size of the V6
Yes