Raise3D Raise3D Pro3 Series Hyper Speed Natural ABS Filament - 1.75mm

Raise3D Pro3 Series Hyper Speed White ABS Filament

With almost no warpage and improved interlayer adhesion, Hyper Speed ABS is an excellent option for functional prototyping, custom jigs and fixtures, and a variety of end-use parts. 

Thanks to optimized molecular weight and stiffness, Hyper Speed ABS is capable of achieving faster melting and cooling during high-speed printing. This results in a lower temperature gradient and inner stress of your 3D printed parts, allowing for more strength and impact resistance.

Technical Specifications and Settings

Printer Settings: 

• Nozzle temperature: 210-260°C
• Printing Speed: 25-300 mm/s
• Build Platform Temperature: 55-65°C
• Cooling Fan: On
• Layer height: 0.1-0.2 mm
• Dry temperature: 50°C

Printing Notifications:

• Adding a brim or raft is recommended for better bed adhesion and to avoid potential warping.
• Hyper Speed ABS is compatible with Premium PVA+

Raise3D Hyper Speed ABS Technical Data Sheet - download here

Raise3D Hyper Speed ABS Safety Data Sheet - download here

Please note that for Hyper Speed to function correctly, the Hyper Speed Hot Ends 0.4mm (Pro3 Series Only), the Hyper Speed Auto Calibrator (Pro3 Series Only), and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.