Sinterit Sinterit Flexa Bright Fresh SLS Powder (2kg)

SINTERIT FLEXA BRIGHT FRESH 

FLEXA Bright Material: Prototyping and Functional Uses

Dedicated rubber for high-elongation parts with possibility to dye into other colors post-printing.

Key Features of the Sinterit Flexa Bright:

• Flexible
• Dyable - achieve custom colors
• Brightly Colored

Example Applications for Sinterit Flexa Bright:

• Pre-surgery and training models for the medical industry
• Flexible Prototypes
• Clothing Parts

---

Which Lisa Compact SLS 3D Printers are compatible with Sinterit Flexa Bright?

How do Sinterit's Flexible SLS Powders Compare to Each Other?

What are the Technical Specifications of Sinterit's Flexa Bright?

GENERAL
Technology	Powder for Selective Laser Sintering (SLS) 3D Printing
Material Type	TPU
Dedicated for	Lisa PRO, Lisa X, NILS 480 (on demand)
Software	Sinterit Studio Advanced
Material refreshing ratio¹	0%2
Color	Oyster White
Nitrogen Needed	No
MECHANICAL PROPERTIES
Tensile Strength	10.0 MPa
Elongation at Break	318%
Shore Hardness (A)	79
THERMAL PROPERTIES
Softening Point	75.1°C
Melting Point	160°C

¹ Refresh ratio is the amount of refreshing powder required to be mixed after a print with unsintered material.

² Flexa materials have 100 [%] usability. Although to keep printout parameters at optimal levels, we recommend adding 10% fresh powder for each new print.

Information provided within this document shows values for reference and comparison only. Parameters presented in this specification are subject to change without notice. Final part properties may vary based on a printed part design and orientation, material handling as well as printing environment (humidity and temperature). The manufacturer is responsible for validation whether the printout is accurate and fit for the intended purpose.

---

Frequently Asked Questions

WHAT IS A REFRESH RATE?

• In the context of Sinterit products, refresh rate is the ratio of the minimum amount of fresh powder needed in a mixture of material used in an SLS 3D printer. The lower the refresh ratio, the better the cost-efficiency of the material.

HOW DO I REUSE USED FLEXA POWDER?

• While you can use 100% used powder, Sinterit recommends a 10% Fresh inclusion for best results.
• Reuse leftover powder on your next print by adding 10% of Fresh Powder. By mixing 90% used with 10% Fresh powder, you will create a cost-effective, 100% print-ready powder.

WHAT IS THE DIFFERENCE BETWEEN “Fresh” POWDER AND “Starter” POWDER?

• Powder Type	Condition	Description
  Starter	Print-Ready	Powder that's ready to print. (i.e. no need to mix used and fresh powder, it's ready to be poured into the machine and start printing)
  Fresh	Fresh	Powder that's for refreshing the powder. Mixing this with Used Powder will turn it into Print-Ready.
  	Used	Powder leftover from printing, present in overflow bin or remaining after printout cleaning.

HOW DO I MIX "Used" and "Fresh" POWDER?

• Powder Handling Stations or a Powder Sieve can help mix used and fresh powders.
  • The amount of needed fresh powder is automatically calculated by the software and shown on the printer screen after the print job is finished. Just add shown amount of material into the mixing cycle of used material and you can start your next job with refreshed material.

HOW SHOULD I STORE THE PRINTING POWDER?

• Store the powder at room conditions ( ~23°C and 50% humidity – the lower humidity the better)
• Always store the material in a sealed dry box/container.
• Do not leave the container open.
• Clean the machine directly after printing and store the material immediately after removing the print cake.
• Do not let the powder stay in the printer for more than a couple hours.
• Put a few silicone absorbers in the container (but don’t add them to the printer)

DO I NEED AN ATEX VACUUM CLEANER TO CLEAN POWDER?

• Yes. SLS polyamide powder used for 3D printing is considered particulate matter because of its size. Polyamide powder particles are generally 40 micrometers or smaller. If vacuumed in an ordinary vacuum cleaner, the powder could cause an explosion.

  Such materials are subject to labor regulations on air quality and occupational safety. The procedures call for appropriate maintenance of powder at work. Only certified industrial vacuum cleaners should be used to clean such materials.