Siraya Tech Siraya Tech Natural LCD Resin - Tenacious Flexible (1L / 1KG)

Late response but Yes

Late response but Yes, Siraya has a chart of recommended base settings on their website just remember to fine tune using the XP print file.

It is certainly clear though with a beige tint. More of a natural color if you will.

This isn't a clear resin so the question is confusing.

Bottles with 500 g and 1000 g are available. Here in the tile of the product it's not fully accurate. 1 Liter would be 1000 ml (1000 cm3), but as bottles with 1000 g are available I assume you will get the 1000 g bottle, this would be a bit less than 1 Liter. I have no info about density of Tenacious, but Siraya Tech Scult has a liquid density of 1.13 g/cm3 and equals to 1.13 kg/Liter. 1 Liter is 1000 cm3, so with Sculpt it would be around 885 ml in a 1000 g bottle. But I don't know the exact density of Tenacious. (for reffereence: Siraya Tech Sculpt-Ultra has a density of 1.40 g/cm3)

The photo appears to show 500g. I don’t know SLA printing, however one could assume approximately 500mL if it is a similar density to water. If heavier then, then slightly less volume.

I was incorrect. The title clearly says 1L, so apparently it is 1000mL but weights 500grams according to the photos. Didn’t realize it was so light, unless the photo is a different bottle or else the weight is the solid resin content of the printed part.