Sorry, this product is currently unavailable
Alternative products you may be interested in:
Slice Engineering Slice Engineering Mosquito Hotend Upgrade
Maintain high print uptime and expand the versatility of your Pulse by quickly and easily switching between different nozzles using Slice Engineering's Mosquito Hotend for the Pulse XE! This upgrade comes stock with all the components of the Mosquito Hotend assembled on the Pulse XE. Take advantage of the super quick and easy nozzle changes and elimination of heat creep on the Mosquito Hotend to unlock the full potential of your Pulse 3D Printer.
| List Price: | $199.00 |
|---|---|
Want a more in-depth understanding of Mosquito Hotends? Check out our Tech Breakdown: Mosquito Hotend article.
SLICE ENGINEERING'S MOSQUITO HOTEND MAKES SWAPPING NOZZLES ON YOUR PULSE 3D PRINTER QUICK AND EASY
Switching between nozzles on your Pulse 3D Printer has never been quicker and easier than with the Mosquito Hotend. Whether you want to try out new types of nozzles or need different extrusion sizes for different projects, this upgrade for your Pulse will noticeably reduce the time and risks needed to get the job done. With a unique four rod design that attaches to each corner of the heater block, rest assure knowing that it securely mounts the heater block in place so there is zero need to hold it while swapping nozzles like traditional hotends. What's so great about not holding on to a heater block? If it becomes loosened during a nozzle swap, you may possibly ruin your heat break from over tightening the block and nozzle back in place or you may flood your heater block with filament if not tightened enough. Save yourself the time, effort and money fixing these avoidable struggles when our Pulse Pros assemble and install the Mosquito Hotend upgrade on your Pulse 3D Printer.
LESS VOLUME IN THE HOTEND DESIGN ALLOWS FOR MORE PRINT CONSISTENCY AND BUILD VOLUME
Four metal support rods create a spacious air gap between the frame (where filament is fed down) and the heater block, leaving room for a minimal, copper heatsink in between, as well as a small, mounted fan that keeps the right amount of air flowing through the whole setup. The heat will stay contained just where it needs to be, effectively eliminating heat creep and reducing any possible downtime resulting from heat creep clogging. This combination of strategic design elements also happens to require less space than traditional hotends, which open up more vertical build volume on your printer!
TECHNICAL SPECIFICATIONS
- Fully Assembled Mosquito Hotend
- Mosquito Hotend with 24v Fan
- Hotend Thermistor
- Hotend Heater Cartiridge, 24v 50w