Slice Engineering Slice Engineering Mosquito Hotend Kit - Standard Kit

Name: Slice Engineering Mosquito Hotend Kit - Standard Kit
Brand: Slice Engineering
SKU: MM7CHS7D
Price: 124.99 USD
Availability: OutOfStock
Rating: 5.0 (10 reviews)

The Mosquito Hotend, developed by the visionaries at Slice Engineering, is a radical take on 3D printer hotend form. With its improved separated module keyhole design, the Mosquito Hotend is even hotter (and cooler) than ever! Pair the Mosquito Hotend with the Bondtech BMG-M Extruder for the ultimate lightweight, minimalist hotend configuration that does not compromise performance or power. With the Mosquito Hotend, you can eliminate heat creep, perform one-handed nozzle changes, and gain more build volume.

Product No. loading...

ELIMINATE HEAT CREEP WITH THE MOSQUITO HOTEND

The crux of the Mosquito Hotend's design is the separated module keyhole construction and the use of copper alloy metal. The frame at the cold end, which receives the filament being fed down by the extruder, is separated entirely from the heater block by four support rods. This creates a spacious air gap between the two modules, where a minimal, copper alloy heatsink guides the filament down into the heater block. Here, your mounted 3D printer hotend fan (Mosquito Fans available here) keeps the right amount of air flowing through the whole hotend. By combining each of these design elements, the heat creep effect has been effectively eliminated by the design of the Mosquito Hotend. The heat will stay contained just where it needs to be for clean, efficient printing-- all in an elegant and compact form.

THE MOSQUITO HOTEND INTERFACES PERFECTLY WITH THE BONDTECH BMG-M EXTRUDER

Bondtech has created an incredible 3D printer extruder in the BMG-M model (M for Mosquito). Thanks to its dual drive hobbed gears, it is a small, swift, and precise 3D printer extruder. Combine the BMG-M with the Mosquito Hotend to create a mighty yet lightweight duo that allows for increased 3D printing speeds! The Mosquito Hotend features mounting holes and locating indents designed to interface perfectly with the bottom of the BMG-M Extruder for a seamless installation experience.

PERFORM SIMPLE ONE-HANDED NOZZLE CHANGES

An additional, exciting benefit of the four-rod design of the Mosquito Hotend is that the heater block is completely stationary, so inserting and removing your 3D printer’s nozzle doesn't move the heater block! With no need to hold the heater block in place, removing and installing your nozzle just became much faster and easier! The simplicity of installing the right 3D printing nozzle for the job helps ensure your finished 3D prints look and perform their best.

SMALLER HOTEND, MORE BUILD VOLUME

All of these incredible design elements of the Mosquito Hotend are achieved in less space than traditional hotends, so by installing a Mosquito Hotend, you actually open up more vertical build volume on your 3D printer! The only downside to this amazing new tool is that you don't have it--yet!

UNIVERSALLY ADAPTABLE

The Mosquito Hotend’s modular design makes it adaptable to almost any FFF 3D printer, and its ambidextrous, small form factor makes it ideal for multi-extrusion setups. Because the heat break conducts 85% less heat into the heat sink than your standard threaded heat break, the Mosquito Hotend can be mounted with an adapter that you 3D printed yourself! There are 5 different hole mounting configurations that can be used to install the Mosquito Magnum hotend onto your 3D printer, and printable adapters can be utilized to diversify mounting options available.

Here are some STL's you can download and print in order to mount your new Mosquito Hotend to your favorite 3D printer:

Adapter for E3D V6

Adapter for Prusa MK2S

Adapter for Prusa MK3

Groovemount Adapter

Groovemount Adapter for Titan Hotend

Groovemount Adapter for Bondtech QR

Railcore II Adapter