Slice Engineering Slice Engineering Mosquito Magnum+ Hotend - Configurable Kit
The Slice Engineering Mosquito Magnum+ Hotend includes all of the industry-leading benefits of the Mosquito Product line such as bimetallic heat break technology, a 500°C temperature rating, the ability to print all filament from basic PLA to medical-grade PAEK, and the rigid roll cage structure that enables quick one-handed nozzle changes.
Top Slice Engineering Mosquito Magnum+ Hotend Features:
• Filament contacts hot block directly for maximum heat transfer efficiency
• Enhanced structural strength, ideal for large format printers and non-planar printing
• Print PLA up to 88mm 3/s and ABS up to 91 mm3/s
• Boost speed without losing resolution
• Only 30% heavier than a standard Mosquito Hotend, but with 3.5x the output
| List Price: | $289.99 |
|---|---|
| Price: | $289.99 |
| Price: | $... |
| Order Now: | Ships calculating... Free U.S. Shipping |
Note: This hotend kit does not come assembled. Assembly instructions can be found here
The Slice Engineering Mosquito Magnum+ Hotend Kit
Achieve breathtaking velocity, with Mosquito Magnum+
This Mosquito Magnum+ Hotend kit includes:
- (1) Mosquito® Heat Sink - Magnum+
- (1) Hot Block Magnum+ - 1.75
- (1) Mosquito® Heat Break - Standard - current
- (1) Hot Block Hardware - Magnum+
- (1) Hotend Wrench Set
- (1) Hotend Mounting Hardware
- (1) Boron Nitride Paste
Note: This hotend kit does not come assembled. Assembly instructions can be found here
Say goodbye to lengthy print times
The Slice Engineering Mosquito Magnum+ hotend has successfully overcome the limitations related to flow rate capacity and kinematics that plagued printing processes of the past. Through design by thermal optimization, the Mosquito Magnum+ has addressed the issues of flow rate, resolution, and mass without the need to trade quality and resolution in exchange for speed.
- Only 30% heavier than a standard Mosquito Hotend, but with 3.5x the output
- Print PLA Up to 88mm3/s and ABS 91mm3/s
- Boost speed without losing resolution
Bridge the gap between traditional manufacturing and FFF additive manufacturing with Magnum+
The Slice Engineering Mosquito Magnum+ addresses one of the primary concerns with material extrusion-based 3D Printing — print speed. Equipped with (2) 50W, 24V Industrial heaters, and a temperature rating of 500C this configuration of the Magnum+ is able to achieve higher volumetric flow rates than traditional hotends further mitigating the gap between traditional manufacturing methods and those of small and large-scale FFF production.
- Print all filament from basic PLA to medical-grade PAEK
- Filament contacts hot block directly for maximum heat transfer efficiency
- Enhanced structural strength, makes Magnum+ ideal for large format printers and non-planar printing.