Snapmaker Desert Tan NylonG Glass Fiber Filament - 2.85mm (0.5kg)

optimized for a variety of materials, including ABS, ASA, TPU, Breakaway PLA, PVA, and HIPS

• Hardened Hot End is optimized for engineering applications, supporting Nylon, Carbon Fiber Reinforced Nylon, Glass Fiber Reinforced Nylon

• Covered by silicone, isolating heated parts to stabilize the temperature and provide protection

Price: $64.00 (with add-ons)
Availability: Only 3 left in stock.
Order Now:
Ships Tomorrow MatterHackers Shipping Truck Free U.S. Shipping - excludes Alaska and Hawaii
Qty
Add to wishlist
Product No. M-JS3-51MZ
Nozzle Size: 0.60mm
0.25mm
0.40mm
0.60mm
0.80mm
1.00mm

Questions View All Responses

What is the percentage of glass fiber in the nylon?

View 1 Response

The data sheet says the coefficient of thermal expansion is “ 0,1 10⁻⁴ / K”. If I assume the European convention for comma rather than decimal point I would read this as 0.1 x 10⁻⁴. Normally CTE is expressed in units of 10⁻⁶ meters/meter. Is the CTE of this material really half that of aluminum and 1/10 of that of most nylons, 10 x 10⁻⁶? As a liquid, it would have the CTE of regular nylon but as it cools, the glass puts the nylon into severe strain, probably why it is difficult to print. Clearly a bed temperature and heated environment will be critical, and cooling should be gradual and uniform. But really the amazing fact is that this CTE is less than 1/2 that of Aluminum, 23.6x10⁻⁶ and nearly that of Titanium, 9.7x10⁻⁶! The plot of CTE over temperature is a necessary component of the spec sheet. Does water absorption cause the printed parts to crack? Thanks!

Add Response

Using a stock Ender 3 Pro. What additional upgrades would be necessary to maximize print quality for NylonG?

View 5 Responses

how well can the white nylonG transmit light? As in, Will it allow me to illuminate the print with a light source on the inside? trying to avoid clear PETG and need a stiffer polymer, so despite the vulnerability to UV light, uncoated, this material was suggested to me

Add Response

Does this filament need an enclosure to print properly?

View 1 Response

The technical data sheet states a "linear mould shrinkage" of 0.3. 1) Does this mean 0.3%? 2) Does the Matter Control slicer software scale up my model by 0.3% in order to accommodate the shrinkage in the final print, or is this something I should account for manually? 3) Is there a recommended cooling / curing process for the NylonG material so that I know that after a certain amount of time, shrinkage is largely over?

Add Response

Can you please explain what are the best practices to prevent white NylonG from getting yellowish after print?

View 1 Response

does anyone know what the best support spacing is for top and bottom for z axis only?

Add Response

Is there an approved annealing process for this filament? No matter how much magigoo i use chamber temp, i get minor warping (parts i'm printing take 24 hrs +). I would like to relieve the internal stresses to hopefully straighten my parts out.

Add Response

Is this a pa6, 66, 12 or something different?

View 1 Response

The data sheet says the tensile strength is 95 MPa using ISO 527. Other manufacturers publish 3 strength values: xy, yz, xz. as a 3D printed structure is non-isotropic. (Meaning the material strength properties are different in each direction). The weakest direction, I suppose, is the direction that tests layer adhesion. Can you give me a better idea of how the material was tested? Were printed test samples used or molded samples, etc...

Add Response

Can a Ender 3 with Micro Swiss hotend and extruder print Nylon G with stock thermistor and heat canister?

View 1 Response

We print straight out of our let it start dehydrating for about an hour or two at 75 c max setting I just set the time for 12 hours and after an hour or two we start our printers and we feed directly into our enclosed printers on garolite with magigoo pa and hardened nozzle all metal hotend and just let it print

Add Response

First print we did was perfect at 260c bed at 75c. I’m using a carbon fiber print bed and magigoo PA adhesive. I am using an extremely modified Ender6 with a slice engineering mosquito magnum with a Bondtech DDX extruder. Seems to me the extruder is as important as any other settings as your Esteps must be perfect. My only dislike is the orange is not as bright as it shows in samples. Amazing filament.

Add Response

How much does the spool weigh for .5kg/1.75 ?

View 2 Responses

For everyone talking this product down…Try HARDER!!!! It’s by far my favorite material and the finish is insane ONCE you figure it out lol..you will see a nice glitter finish and 0 layer lines…I went through rolls with of this stuff until I got it…TRY HARDER…I promise it’ll be worth it in the end…I print on a modded ender 3 with or w/o an enclosure sometimes, I’ve successfully printed “big” entire build volume models …trust me I was pissed AF for a long time until I figured it out lol…

View 2 Responses

You appear to no longer carry Dupont Zytel. How does this compare, especially with settings?

View 1 Response

This filament have the same warping problem like Nylon X ??

View 2 Responses

I am trying to print apart using black NylonG. I have made 3 attempts so far and each time The part warps and one of the corners comes loose from the bed. With each attempt I make it further into the print but end up with the same result. I’m using a CR10s pro with no part cooling fan with printer in an enclosure and an internal temp of 35c inside enclosure. First attempt: Glass bed, @ 60c, nozzle 260c, NANO polymer adhesive from VisionMiner, printed with a brim and used recommended feeds recommended from MatterHackers. Second try: same as before but 80c on bed Third try: 90c bed temp, 25% feed rate on first layer, 50% second then 100% for remainder. I have used about 375g of material thus far. I am using 100% infill for this part which I’m share doesn’t help. Any recommendations?

View 4 Responses

I have never printed with nylon so, I am learning about it. Why do you need to dry it? Is it because it has a lot of moisture in it from the factory or do you have to do this every time?

View 2 Responses

Can the glass fibers fall out during printing or when you touch it like with Colorfabb XT-CF20, I'm really scared of breathing in or getting glass fiber splinters with this. The only hazard i see is a burn hazard on the safety data sheet.

View 2 Responses

Went through almost 2 spoils of nylon G now . I have a flashforge creator pro upgraded with all metal hot end and it still isn’t hot enough for good later adhesion . I printed at 40mm/s at 280c and had a decent print but layer adhesion just wasn’t there completely . At least for my Glock frame that is, it seems like you should really be printing this material at 280 plus to get the most out of this material , I even had it sit in the oven for 24 hours at 180c . It is somewhat strong but my PLA plus blows it out of the water as far as strength goes. Do you think I should print with an ender 3 to get better later adhesion since those can go to 300c ?

View 7 Responses

Is the 3kg weight the amount of material on the spool? What's the length?

View 1 Response

Can this be printed safely in a standard office with standard ventilation?

View 1 Response

I bought the printdry filament drying system, what would be the best temp to dry this at and for how long?

View 1 Response

Ask a question about this product

Back to top