Sorry, this product is currently unavailable
Taulman Taulman In-PLA PLAdium Black Filament - 1.75mm (1kg)
Taulman's In-PLA (formerly known as PLAdium) is a unique kind of PLA filament. In-PLA is transparent in color, is very low warp, and has a nice shiny finish to it upon print completion. In-PLA prints best when you lay down blue painter's tape on your print bed to prevent the material from unsticking to the print bed.
| List Price: | $50.00 |
|---|---|
| Availability: | Currently Unavailable |
Formerly known as PLAdium, In-PLA is a unique PLA created by Taulman 3D. It is a transparent looking filament that is hard like PLA, but with a very smooth texture. Black In-PLA has a beautiful obsidian color to it.
In-PLA has a good amount of tensile strength and holds up well when compressed, but doesn’t have very much shear strength. The rigidity of PLAdium alongside its tensile strength and resistance to compression makes it ideal for static structures, but it’s low shear strength makes it not ideal for being exposed to alternating forces.
For optimal printing results, we recommend printing at 210C. To help prints stick to the bed, lay down blue painters tape on your print bed.
Check out these prints in six different In-PLA colors! Shiny!
Technical Specifications:
Printing Temperature: 207°C - 212°C
Print Speed: ABS speeds
Retraction: .5mm/.1mm nozzle or for a .5mm nozzle = 2.5mm
Print bed: Hot- Glass heated to 70°C
Questions
Can I upgrade the Pulse XE NylonX with this?
Will this work with the Anycubic Mega X?
Will this work on Anycubic Vyper?
Will this work for the CR-10 V3
Will this work for cr10s.. I'm assuming so so what else would I need to complete the setup?
How do I connect this to my anycubic mega x? The connectors are different. Thanks
Is there mount for the Ender 3?
What kind of thermistor is this precisely? What model number? Should marlin have this set at 5 or 6?
Is this computable with monoprice mini select?
Is this a direct drive hot end or is it meant for a bowden type machine?
Do i still need to tighten the nozzle at running hot condition or that is done out of the box?
Is the PTFE tubing Capricorn? If so, is it the light blue TL Series or the dark blue XS Series?
Will this fit my gCreate gMax XT+?
Is this plug and play for the i3 Mega with Ultrabase? I've looked at the Thingiverse post, but it doesn't work with the new version according to the comments.
Will this work with a CR-10?
Is this compatible with the Fusion3 F410?
Is this going to work with the Robo r1+ as the non gold does , and can you supply the slide holder ❓❓❓
Prusa Mk2S compatible?
How easy is this to fit to a Robo R1+?
Will this unit fit my Raise 3D N2?
Is this the correct model to upgrade an Anycubic i3 Mega with the Ultrabase?
Is this compatible with the Prusa MK3S+?