Ultimaker Advanced 3D Printing Kit - UltiMaker 2 +

The Advanced 3D Printing Kit contains the following items: 2 x 0.4 mm nozzle, 2 x TFM coupler, 25 x adhesion sheet, 1 x UltiMaker 2+ door enclosure. The nozzle and TFM coupler can be replaced if necessary, and the adhesion sheets can be used to improve build plate adhesion. The door enclosure is effective for printing with materials that are prone to warping and delaminating.

Nozzle can be replaced if worn or jammed
Couplers included for high temperature printing
Door enclosure keeps prints warm and stable

List Price:	$99.95

Product No. M-0LM-L216

What’s included?

The Advanced 3D Printing Kit contains the following items:

2 x 0.4 mm nozzle
2 x TFM coupler
25 x adhesion sheet
1 x Ultimaker 2+ door enclosure

Nozzle

If your nozzle is jammed or worn from printing specialty materials, you may need to replace your nozzle.

TFM coupler

Many specialty materials print at higher temperatures. This could decrease the lifespan of the TFM coupler. There are two new couplers included in the Advanced 3D Printing Kit, to minimize your Ultimaker’s down time when the TFM couplers are due for a replacement.

Adhesion sheets

The adhesion sheets can be used for most materials to improve adhesion to the build plate. They replace the glue stick and can be used multiple times. It is important that the sheet is applied correctly to prevent air bubbles and to ensure a flat printing surface.

Door Enclosure

The door is very effective when printing with materials that are prone to warping and delaminating. This door keeps the warmth from the heated bed inside the printer and protects the print from external influences, consequently creating a stable environment with a constant temperature of 45ºC.