xTool xTool SafetyPro AP2 Air Purifier
The xTool SafetyPro AP2 is an advanced air purifier for laser cutting and engraving, capturing 99.99% of dust and 97.97% of odors with a 6-stage filtration system. It features auto-sync, material-specific settings, and a quiet 55 dB operation. Compatible with all xTool laser models, it offers extended filter life and cost savings with Cyclone separation technology.
- Captures 99.99% dust, 97.97% odors
- 6-stage filtration with SuperCyclone
- Auto-sync with compatible xTool machines
| List Price: | $999.00 |
|---|---|
| Price: | $699.00 |
| Price: | $... |
| Order Now: | Ships calculating... Free U.S. Shipping |
xTool SafetyPro AP2
ULTIMATE DUST & ODOR REMOVAL TECHNOLOGY
Breathe easy with the xTool SafetyPro AP2—the state-of-the-art air purification system designed for all laser cutting & engraving users. This intelligent air purifier removes dust and odors like a champ, capturing 99.99% of dust and 97.97% of odors thanks to its 6-stage filtration system. With features like auto-sync, material-specific settings, and extended filter life, it's the ideal companion to your xTool laser machines for safely and cleanly bringing your creative visions to life!
Key Features of the xTool SafetyPro AP2 Air Purifier:
- Removes 99.99% of dust & absorbs 97.97% of odors
- 6-layer filtration system features SuperCyclone filter for a clog-free experience
- Includes intelligent features such as...
- Auto-presets for different materials
- Auto-on/off syncing with some xTool machines
- Monitoring filter lifecycles
- Cyclone separation technology extends pre-filter lifespan by 10 times for cost savings
- Operates at 55 dB for quiet, non-disruptive use
- Compatible with all* xTool laser models for seamless integration
*All xTool machines are compatible with this air purifier, but only some machines can utilize the auto-sync feature. See FAQ for compatibility.
Six Layers, Zero Worries
The xTool SafetyPro AP2 features a comprehensive 6-layer filtration system weighing 20lbs, ensuring thorough removal of fumes, odors, and particles during laser processing. From large particles to microscopic dust and harmful gases, each layer targets specific contaminants, providing a safer and cleaner working environment. See below how each filter freshens your environment:
- SuperCyclone: Blocks 99% of large particles
- Pre-Filter: Captures 90% of visible debris
- Medium Efficiency: Removes 95% of 0.3μm fine dust
- Activated Carbon: Intercepts 84.4% of harmful fumes
- Ultra-Dense Carbon Mesh: Absorbs 97.97% of odors
- HEPA Filter: Filtrates 99.97% of 0.3μm dust, allergens, and viruses
Cyclone Force, Cleaner Course
The xTool SafetyPro AP2's SuperCyclone Separation Technology revolutionizes dust collection with 36 parallel cyclone groups. This innovative system captures 99% of large particles, extends filter lifespan, and offers easy maintenance, making it the ultimate solution for efficient and cost-effective laser cutting dust management.
- Captures 99% of large particles
- Extends pre-filter lifespan by up to 10×
- Washable and reusable, reducing replacement costs
- Prevents filter clogging for consistent performance
Filter Smarter, Not Harder
Experience effortless operation on the xTool SafetyPro AP2 thanks to its intelligent features. It syncs with xTool lasers for automatic on/off, tailors settings to materials, and monitors filter life. With a powerful motor and easy-to-change filters, it offers a superior user experience in air purification.
- Auto-syncs with xTool lasers for seamless operation
- Customizes filtration settings based on material selection
- Real-time filter life cycle monitoring for optimal efficiency
- High-torque motor for rapid exhaust of polluted gases
- Magnetic door design for easy filter replacement
TECHNICAL SPECIFICATIONS
| Compatible Machine(s) | xTool D1 xTool F1 / F1 Ultra xTool M1 / M1 Ultra xTool P2/ P2S xTool S1 Laser machines with a smoke exhaust pipe diameter of 3 inches |
| Auto-Sync Compatibility | xTool F1 Ultra xTool M1 Ultra xTool P2S xTool S1 |
| Filter Layer(s) | ✔ SuperCyclone Filter ✔ Pre-Filter ✔ Medium Efficiency Filter ✔ Activated Carbon Layer ✔ Ultra-Dense Carbon Mesh ✔ High Efficiency Filter |
| Pre-filtration System | Cyclone Separation |
| Control Mode | Touch button, four adjustable gears |
| Feature(s) | ✔ Auto-On/Off (with certain xTool models) ✔ Auto Mode (auto matches ideal settings based on material) ✔ Filter Life Cycle Monitoring |
| Product Size (W × D × H) |
290mm × 491mm × 542mm (11.42" × 19.33" × 21.34") |
| Product Weight | 20.7kg (45.64lb) |
| Noise | 55dB |
| Rated Power | 20W |
| Warranty | 12 Months |
FAQ
Is the SafetyPro AP2 compatible with all xTool laser machines?
Yes, Manual mode is compatible with all xTool lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1.
Note: Auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.
Why can only certain models sync?
Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission.
Currently, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.
Is it compatible with laser machines from other brands?
The diameter size that the xTool SafetyPro AP2 can adapt to is 3 inches. If the size of the smoke exhaust pipe of the laser machine meets the requirements, then it is compatible. Note that it won't be able to utilize the Auto-mode as that is only reserved for the machines listed in the answer to the first question of this section.
Can the air outlets be vented directly into the room?
Yes, exhaust air can be discharged directly into the room because xTool's SafetyPro AP2 purified exhaust air meets the air quality requirements for direct indoor exhaust.
Do I need to turn off the laser fan when the purifier is in use?
The P2 and P2S models need to turn off the fan of the laser machine when used with the purifier. The P2S will automatically turn off the fan when linked with the purifier.
Other laser machines do not need to have the fan turned off when used with the purifier.
How often should the cyclone be cleaned?
It’s recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.
Does the cyclone need to be dried after cleaning?
Yes, it needs to be dried. A damp cyclone can affect the lifespan of the 3rd and 4th filters (the activated carbon layer and the carbon mesh layer).
