Sorry, this product is currently unavailable
Perhaps some of these categories are of interest:
E3D E3D Lite6 HotEnd Kit - 1.75mm (Bowden) (24v)
We all want better prints, plain and simple. Not all of us, however, have the need to print with materials that require blistering temperatures. Enter: the E3D Lite6 HotEnd. The Lite6 is designed to perfect printing with PLA, ABS, and - thanks to the full-length PTFE liner - flexible materials like Ninjaflex.
List Price: | $50.49 |
---|---|
Availability: | In Stock |
The E3D Lite6 HotEnd is respectable and dependable when compared to its counterpart - the v6. The Lite6 was devised to make printing PLA and ABS easier, smoother, and really, just an all-around better 3D printing experience for the user. Without wounding the old bank account, you can achieve prints that will make seasoned 3D printing vets proud - maybe even jealous!
3D printing is a journey - there is always something new to learn with each print. That's why the Lite6 is the ideal middle-ground in your 3D printing progression. This hotend will help you fine-tune your prints before you are ready to dive into high-temp prints with a more mature hotend, like the E3D v6 All-metal.
There is plenty of room for experimenting - all of the 1.75mm E3D v6 Extra Nozzles are compatible with the Lite6. When you are printing with ABS, PLA, and flexible materials, you can toy with various nozzle resolutions to create a finer print.
The Lite6 is essentially made of the same parts that compose the v6, so consistency and credibility are found without question. Any mount or adapter your printer requires for the upgrade that is compatible with the v6 will work for the Lite6, as they share the same external measurements.
- What's In The Box?
- Metal Parts
- 1 x Stainless Heatsink (Contains brass embedded bowden coupling ring pre-fitted in top)
- 1 x Aluminium Heater Block
- 1 x Brass Nozzle (0.4mm)
- Electronics
- 1 x 100K Semitec 104GT2 NTC thermistor
- 1 x 24v 25W Heater Cartridge
- 1 x 24v 30x30x10mm fan
- 1m of Thermistor wire
- 4 x 0.75mm Ferrules - for Solder-Free Wire Joins
- Fixings
- 4 x Plastfast30 3.0mm x 16mm screws
- 1 x M3x3 socket dome screw and M3 washer
- 1 x M3x10 socket dome screw
- 1 x Fan Duct (Injection Moulded Translucent Polycarbonate, usually red)
- 1 x Small Black Plastic Collet
- Bowden Version
- 800mm of 4mm outer diameter, 2mm inner diameter PTFE tubing.
- 1 x Screw in Coupler for extruder end of tubing.
Tech Specs
- 1.75mm Bowden
- 24v Heat Cartridge
- Temp: reaches 240 degrees Celsius
- Speed: 20-50 mm/s
- Nozzle size: 0.40mm
- Compatible with v6 Extra Nozzles
- Compatible with v6 mounts/adapters
- Prints ABS, PLA, and various flexible filaments
Questions
I'm trying to find out what printers can handle this filament? Which handles it Best? Which is best for someone not trying to spend an arm and a leg on a printer?
Please provide a review video with a bit more in-depth information.
How does zytel glass or cf compare to taulman nylons and nylon X considering durability stress,impacts, etc.
Hi, When will you guys have the carbon fiber reinforced zytel, or the glass fiber zytel? Those zytel filament types are available elsewhere, but I would prefer to purchase from you guys.
Hi @Mical Murray! Unfortunately, we don't have a restock date for this product yet. When an item is on its way to us, you'll see a green label with an estimated restock date in the price panel. My recommendation is to click that "Notify Me" button so you'll be emailed when we finally do restock.
When will this be in stock again? Our company will possibly by several rolls of this.
does it come in black or how does one dye it?
will it work for gun parts
That depends on what you're printing.
Should be good for mags and probably glock frames.
Yes for receivers of glocks, at-15’s and of your adventurous and KNOW WHAT YOUR DOING the akm reciever that’s available. I printed an ar-15 reciever with nylonG. Haven’t shot it yet we shall see how it holds.