Protopasta NinjaTek Chinchilla Midnight Black TPE Filament - 2.85mm (0.5kg)
Protopasta Carbon Fiber Reinforced PLA is a high-strength, low-warpage filament that is perfect for printing frames, supports, propellers, and other non-bending items. It is made in the USA with specifically-designed carbon fiber that is small enough to fit through most 3D printer nozzles. This filament is moisture sensitive and can be quite brittle, so it should be handled with care.
- Carbon fiber reinforcement for increased strength
- Made in the USA
- Perfect for printing items that do not bend
| List Price: | $55.00 (with add-ons) |
|---|---|
| Availability: | Currently Unavailable |
Protopasta Carbon Fiber Reinforced PLA filament provides fabulous structural strength and layer adhesion with very low warpage. Due to the carbon fiber that is in the filament, it contains increased rigidity, therefore it has increased structural support built right in. This filament is perfect for printing items that do not bend, such as: frames, supports, propellers, and tools - drone builders and RC Hobbyists love this stuff, and it is made in the USA!
The carbon fiber in the filament is specifically designed to be small enough to fit through the nozzles, but long enough to provide the extra rigidity that makes this reinforced PLA so special.
Printing with Protopasta Carbon Fiber PLA is very similar to printing in standard PLA - it does not require a heated bed. The carbon fiber can make the PLA a little more abrasive when extruding, meaning that prolonged use can increase wear on your 3D printer - especially on lower end nozzles.
Print Temperature: 190C-210C
Carbon Fiber Reinforced PLA is moisture sensitive, so we ship it in a sealed bag with dessicant. The filament is quite brittle, so it should be handled with care when feeding/loading through your printer.
Print some sturdy shades!
Questions
Will this work with a CR-10? Or am I limited to the V6lite?
Will this work on a tevo tornado? if so what steps are needed? thanks
Will this work as a direct replacement for an original equipment Pulse XE D-124?
Will this work as a direct replacement for an original equipment Pulse XE D-124?
Can I still download the installation guide for SeeMeCNC Rostock Max V2 - 1.75mm Universal (Bowden add-on) (12v)?
can i put this onto a monoprice mini v1, and would i need to do anything to the firmware of the printer, and if so, how would i do this?
I have a robo3d r1. I purchased the 12v direct drive kit. did I purchase the right kit? some of the instillation videos show the Bowden kit
What is the pitch on the Plastfast 3.0x16 screws for the fan?
Any timeline on when Rostock Max v3 installation instructions will be released?
When do you guys plan to have it back in stock?
Can I use the Bowden add on with my printrbot simple metal?
What steps do i need to install this into a i3 Mega and CR-10S? also does it include a nozzle? and i noticed there options for a thermocouple, and thermastat.. are these already included? Thank you.
Will this work with the monoprice select mini?
Will this work with an Anycubic i3 Mega (Ultrabase edition)?
Can fit on ROBO 3D R1 + (plus)
I built, installed and PID tuned my E3Dv6 I got from you and it looks really nice. But. No matter my PLA part cooling fan setting, no matter the temperature setting, it jams. It isn't the usual jammed-in-hotend-rebuild-the-hoten sort of jam. I can get the filament out, no issue. I have raised my printer temperature 20 degrees higher than I normally print this filament type, but no good, clear under extrusion, clear extruder grinding the filament. I use a "duster" disk to keep gunk out, but nothing is working. What should I look for that I am clearly missing?
What do you have to change on the firmware? If I adjust the machine to physically be at the correct distance from the bed as well as understanding that the new mounting will impact my print area if unchanged, is there anything else?
I have a Makerbot Replicator 2x. (Works only ABS and PLA) We need to work with 1.75 nylon filament. What kind of accessories do I need to change? Thank you
I have a Rostock Max V3. Has anyone managed to mount this on the V3? Is it worth it - that is what are the advantages?
What size ferrule cable crimp terminals would fit the thermistor cable, as the one i have supplied is too short so need to extend it.
How is this different than the Direct version?
Do you sell extension cables that fit the connector on the fan and thermistor, also the heater cartridge? I need them to be more than 2x longer then they already are?
i purchased this kit for my rostock maxx v2, but i cannot get the coupler to connect to the underside of the stock extruder
Do these come with the new silicone socks that are on the e3d site? http://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden
I recently installed a E3D hotend on my rostock max V2 and I noticed that the old layer fan shroud that came with the stock hotend is very close to the print bed and has started catching on prints. Is there a modified shroud that needs to be used with the new hot end?
do you sell just the nipple of the bowded tube?
what is the maximum temperature usable.
What is the size of the coupler thread?
Is this compatible with the maker select?
Will this or on a Prusa I3 3d Printer of Ebay ?
I couldn't find the option to get a 24v E3D v6 - it passes all the way to credit info and still no option.
Is this hot end compatible with a Lulzbot Taz 2?
What version should I buy for ender 3?
This is not a direct drop-in part for the Ender 3. The hot end upgrade for the Ender 3 can be found here. Please email us at support@matterhackers.com for more info.