MatterHackers Silky Purple MH Build Series PLA Filament - 1.75mm (1kg)
MH Build Series Silky Silky Silky Silky Silky Purple PLA is an affordable PLA filament intended for producing quality 3D-printed parts with a silky, gleaming finish.
- Beautiful, shiny surface finish
- Bulk pricing available - save more with each spool purchased
- Compatible with Bambu AMS
- As low as $26.87
| List Price: | $31.99 |
|---|---|
| Price: | $31.99 |
| Price: | $... |
| Availability: | Out of Stock Notify Me |
| Order Now: | Ships Today |
MH Build Series Silky PLA Filament
MH Build Series is the #1 Selling PLA Filament at MatterHackers!
MH Build Series PLA is the best-selling PLA at MatterHackers, and Silky PLA is right in the mix as one of the top choices for anyone looking to create quality, silky/shiny parts affordably.
Here are the top features of MH Build Series Silky PLA:
- Affordable - priced right for every user
- Bulk pricing options - the more you buy, the more you save per spool
- Tons of bold, shiny, unique colors to choose from - view all Silky PLA colors here
- MH Build Series is also available in standard PLA, ABS, PETG, and TPU
Tons of Colors to Choose From
MH Build Series Silky PLA comes in a wide variety of colors to meet all your project needs.
- See all MH Build Silky PLA color options here
- Prototype affordably in product-ready colors
- Browse the most popular colors users purchase daily:
Lowest Prices - Even Lower with Bulk Pricing!
MH Build Series Silky PLA filament is the most affordable material on the market that is still reliable and capable of producing high-quality results.
- Lowest prices for quality parts
- Bulk pricing available
- The more you buy, the more you save per spool
Beautiful, Shiny Surface Finish
MH Build Series Silky PLA has a beautiful surface finish, making your prints appear super sleek - some even look like polished metals!
- Shiny surface finish making your parts pop
- Beautiful gloss and luster
- Popular for end-use parts and models
What is PLA Filament?
PLA (Polylactic Acid) is a thermoplastic polymer made from renewable resources such as corn starch, sugarcane, or other starch-rich crops. It is commonly used as a 3D printing filament for a variety of reasons, including:
- It's really easy to use
- Low warping
- Environmentally friendly - much more biodegradable when compared to other petroleum-based plastics
Technical Specifications
Printer Settings:
- Extruder Temperature: 205±15°C
- Bed Temperature: Not needed, but 40±15 °C if your printer has heated bed
- Learn more about how to succeed with PLA here
Spool/Filament Dimensions:
- 200mm Total Diameter (approximately)
- 50mm Inner Hole Diameter (approximately)
- 65mm Height (approximately)
- 1 kg spool
- True Diameter: 1.75mm or 2.85mm
- Dimensional Accuracy: ±0.03mm
- Density: 1.25 g/cm³
- Volume: 0.80 L
- Length: 332.60 m
Technical Data Sheets:
Click here to view all MH Build Series PLA size and color options.
Questions
Will this work with a CR-10? Or am I limited to the V6lite?
Will this work on a tevo tornado? if so what steps are needed? thanks
Will this work as a direct replacement for an original equipment Pulse XE D-124?
Will this work as a direct replacement for an original equipment Pulse XE D-124?
Can I still download the installation guide for SeeMeCNC Rostock Max V2 - 1.75mm Universal (Bowden add-on) (12v)?
can i put this onto a monoprice mini v1, and would i need to do anything to the firmware of the printer, and if so, how would i do this?
I have a robo3d r1. I purchased the 12v direct drive kit. did I purchase the right kit? some of the instillation videos show the Bowden kit
What is the pitch on the Plastfast 3.0x16 screws for the fan?
Any timeline on when Rostock Max v3 installation instructions will be released?
When do you guys plan to have it back in stock?
Can I use the Bowden add on with my printrbot simple metal?
What steps do i need to install this into a i3 Mega and CR-10S? also does it include a nozzle? and i noticed there options for a thermocouple, and thermastat.. are these already included? Thank you.
Will this work with the monoprice select mini?
Will this work with an Anycubic i3 Mega (Ultrabase edition)?
Can fit on ROBO 3D R1 + (plus)
I built, installed and PID tuned my E3Dv6 I got from you and it looks really nice. But. No matter my PLA part cooling fan setting, no matter the temperature setting, it jams. It isn't the usual jammed-in-hotend-rebuild-the-hoten sort of jam. I can get the filament out, no issue. I have raised my printer temperature 20 degrees higher than I normally print this filament type, but no good, clear under extrusion, clear extruder grinding the filament. I use a "duster" disk to keep gunk out, but nothing is working. What should I look for that I am clearly missing?
What do you have to change on the firmware? If I adjust the machine to physically be at the correct distance from the bed as well as understanding that the new mounting will impact my print area if unchanged, is there anything else?
I have a Makerbot Replicator 2x. (Works only ABS and PLA) We need to work with 1.75 nylon filament. What kind of accessories do I need to change? Thank you
I have a Rostock Max V3. Has anyone managed to mount this on the V3? Is it worth it - that is what are the advantages?
What size ferrule cable crimp terminals would fit the thermistor cable, as the one i have supplied is too short so need to extend it.
How is this different than the Direct version?
Do you sell extension cables that fit the connector on the fan and thermistor, also the heater cartridge? I need them to be more than 2x longer then they already are?
i purchased this kit for my rostock maxx v2, but i cannot get the coupler to connect to the underside of the stock extruder
Do these come with the new silicone socks that are on the e3d site? http://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden
I recently installed a E3D hotend on my rostock max V2 and I noticed that the old layer fan shroud that came with the stock hotend is very close to the print bed and has started catching on prints. Is there a modified shroud that needs to be used with the new hot end?
do you sell just the nipple of the bowded tube?
what is the maximum temperature usable.
What is the size of the coupler thread?
Is this compatible with the maker select?
Will this or on a Prusa I3 3d Printer of Ebay ?
I couldn't find the option to get a 24v E3D v6 - it passes all the way to credit info and still no option.
Is this hot end compatible with a Lulzbot Taz 2?
What version should I buy for ender 3?
This is not a direct drop-in part for the Ender 3. The hot end upgrade for the Ender 3 can be found here. Please email us at support@matterhackers.com for more info.