Sorry, this product is currently unavailable
Alternative products you may be interested in:
Elegoo Elegoo Neptune 4 Pro 3D Printer
The Elegoo Neptune Pro 3D Printer offers a maximum print speed of up to 500mm/s with pre-installed Klipper firmware. These models also include a 121-point auto bed leveling system, gantry LED light strip, filament sensor, and more. The Neptune 4 Pro features an intelligent segmented heatbed and all-metal guide rails.
- Fast print speed up to 500mm/s
- Print volume of 225 x 225 x 265mm3
- Max print temperature of 300C
- 121-point auto bed leveling
- Pre-installed Klipper firmware
| List Price: | $300.00 |
|---|---|
| Availability: | In Stock |
ELEGOO NEPTUNE 4 PRO
EQUIPPED WITH KLIPPER
The Elegoo Neptune 4 Pro cranks up print speed and efficiency with pre-installed Klipper firmware on the 3D printer, allowing users to reach fast maximum print speeds of up to 500mm/s.
Key Features of the Elegoo Neptune 4 Pro 3D Printer:
- Max Print Speed: Up to 500mm/h
- Recommended Print Speed: Up to 250mm/h
- Max Hotend Temperature: 300°C
- Pre-installed with Klipper firmware
- 121-Point (11 x 11) auto bed leveling
- Dual-gear Direct-Drive extruder
- 4x part-cooling fans ensure rapid cooling, no matter the print speed
- Overheat protection switch
- Neptune Pro features the following:
- Intelligent segmented heatbed
- All-metal guide rails
- Three Options of Print Volume:
- Neptune 4 and Neptune 4 Pro: 225×225×265mm3 (8.8×8.8×10.4in3)
- Neptune 4 Plus: 320 x 320 x 385mm (12.6 x 12.6 x 3.4in3)
- Neptune Max 420mm x 420mm x 480mm3 (16.5×16.5×18.9in3)
The Elegoo Neptune 4 Pro 3D printer, featuring a Klipper motherboard and ARM 64-bit processor, offers lightning-fast printing speeds up to 500mm/s and improved print quality via input shaping and pressure advance.
- Klipper firmware pre-installed
- Max Print Speed: 500mm/s
- Recommended: 250mm/s
- Supports input shaping and pressure advance
UPGRADED EXTRUSION SETUP
The Elegoo Neptune 4 Pro maintain excellent print quality and heat dissipation, and smooth filament extrusion for a variety of materials, even at high speeds, by utilizing a lightweight dual-gear direct extruder, extended hotend, and multiple cooling fans.
- Lightweight Direct Drive Extruder
- Max Hotend Temp: 300°C
- Rapid omnidirectional cooling via:
- Side: 2 x 4015 fans
- Back: 4 x 4020 fans
SMART SEGMENTED HEATED BED
The Elegoo Neptune 4 Pro offers an efficient and safe printing experience with a segmented heated bed that has overheat protection and customizable temperature control for different model sizes.
- Smart segmented heated bed adds efficiency and saves energy
- Overheat protection switch reduces chances of heated bed damage or fire
- Customize heated bed settings based on model size
- 100W bed for models < 120x120mm2
- 250W bed for models >120x120mm2
QUIET, STABLE PRECISION
Experience quiet and precise 3D printing on the Elegoo Neptune 4 and Neptune 4 Pro with its silent drivers, smooth POM V-guide wheels, and a dual lead screw design for enhanced accuracy and stability.
- Frame: CNC-machine Aluminum
- Operation Noise: Below 50db
- Z-Axis: Dual lead screw + dual motor
- Neptune 4 Pro: All-metal guide rails
ENJOYABLE PRINTING EXPERIENCE
Printing is a pleasant experience with the Elegoo Neptune 4 Pro, which offers a variety of practical features that add convenience and efficiency to your workflow.
- Power Loss Recovery
- Filament Sensor
- Gantry LED light strip
- Removable touchscreen
- Magnetic Bed
What are the Differences Between the Elegoo Neptune 4 series?
 |
 |
 |
 |
|
|---|---|---|---|---|
| Model | Neptune 4 | Neptune 4 Pro | Neptune 4 Plus | Neptune 4 Max |
| Price | $259 | $279 | $350 | $470 |
| Print Volume (L × W × H) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
320 × 320 × 385mm3 (12.6 × 12.6 × 15.16in3) |
420 × 420 × 480mm3 (16.54 × 16.54 × 18.9in3) |
| Intelligent Segmented Heatbed | ✘ | ✔ | ✘ | ✘ |
| Overheat Protection Switch | ✘ | ✔ | ✔ | ✔ |
| All-Metal Guide Rails | ✘ | ✔ | ✘ | ✘ |
What are the Technical Specifications of the Elegoo Neptune 4 and Neptune 4 Pro 3D Printer?
| Neptune 4 | Neptune 4 Pro | Neptune 4 Plus | Neptune 4 Max | |
|---|---|---|---|---|
| GENERAL | ||||
| Technology | FDM | FDM | FDM | FDM |
| Assembly | Fully-Assembled | Fully-Assembled | Fully-Assembled | Fully-Assembled |
| Machine Volume (L × W × H) |
475 × 445 × 515mm3 (18.7 × 17.5 × 20.3in3) |
475 × 445 × 515mm3 (18.7 × 17.5 × 20.3in3) |
533 × 517 × 638mm3 (21 × 20.4 × 25.1in3) |
658 × 632 × 740mm3 (25.9 × 24.9 × 29.1in3) |
| Made in | China | China | China | China |
| PRINTING PARAMETERS | ||||
| Print Volume (L × W × H) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
225 × 225 × 265mm3 (8.85 × 8.85 × 10.43in3) |
320 × 320 × 385mm3 (12.6 × 12.6 × 15.16in3) |
420 × 420 × 480mm3 (16.54 × 16.54 × 18.9in3) |
| Filament Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Nozzle Diameter | 0.4mm | 0.4mm | 0.4mm | 0.4mm |
| # of Extrusions | Single | Single | Single | Single |
| Extruder | Dual Gear Direct Drive | Dual Gear Direct Drive | Dual Gear Direct Drive | Dual Gear Direct Drive |
| Max Nozzle Temperature | 300°C | 300°C | 300°C | 300°C |
| Max Bed Temperature | 110°C | 110°C | 110°C | 110°C |
| Max Print Speed | 500mm/s | 500mm/s | 500mm/s | 500mm/s |
| Recommended Print Speed | 250mm/s | 250mm/s | 250mm/s | 250mm/s |
| Min Print Speed | 30mm/s | 30mm/s | 30mm/s | 30mm/s |
| ADDITIONAL FEATURES | ||||
| Frame | CNC-machine Aluminum | CNC-machine Aluminum | CNC-machine Aluminum | CNC-machine Aluminum |
| All-Metal Guide Rails | ✘ | ✔ | ✘ | ✘ |
| Overheat Protection Switch | ✘ | ✔ | ✔ | ✔ |
| Intelligent Segmented Heated Bed | ✘ | ✔ | ✘ | ✘ |
| Build Surface | PEI (textured) Plate | PEI (textured) Plate | PEI (textured) Plate | PEI (textured) Plate |
| Magnetic Bed | ✔ | ✔ | ✔ | ✔ |
| Auto Bed Leveling | ✔ | ✔ | ✔ | ✔ |
| Auxiliary (Manual) Leveling | ✔ | ✔ | ✔ | ✔ |
| Pre-installed Klipper | ✔ | ✔ | ✔ | ✔ |
| Filament Sensor | ✔ | ✔ | ✔ | ✔ |
| Power Loss Recovery | ✔ | ✔ | ✔ | ✔ |
| Gantry LED Light Strip | ✔ | ✔ | ✔ | ✔ |
| Nozzle LED Light | ✔ | ✔ | ✔ | ✔ |
| Removable Touch Screen | ✔ | ✔ | ✔ | ✔ |
| COMMUNICATION | ||||
| Display | 4.3" Touch Screen | 4.3" Touch Screen | 4.3" Touch Screen | 4.3" Touch Screen |
| UI Language | English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
English, French, German, Russian, Italian, Spanish, Japanese, Chinese |
| Connectivity | USB, WLAN | USB, WLAN | USB, WLAN | USB, WLAN |
| File Transfer | TF Card, Online Printing | TF Card, Online Printing | TF Card, Online Printing | TF Card, Online Printing |
| SOFTWARE | ||||
| Compatible Slicers | Creality Slicer, Cura, Repetier-Host, Simplify3D |
Creality Slicer, Cura, Repetier-Host, Simplify3D |
Creality Slicer, Cura, Repetier-Host, Simplify3D |
Creality Slicer, Cura, Repetier-Host, Simplify3D |
| Supported File Format(s) | STL, OBJ, AMF | STL, OBJ, AMF | STL, OBJ, AMF | STL, OBJ, AMF |
| POWER | ||||
| Input | 100 - 240V 50/60Hz | 100 - 240V 50/60Hz | 100 - 240V 50/60Hz | 100 - 240V 50/60Hz |
| WARRANTY | ||||
| Warranty Period | 1 Year | 1 Year | 1 Year | 1 Year |
Questions
"Bimetallic Heat Break™ technology to prevent jams, and up to 60% faster print speeds" Is this "60% faster" claim based on the printing speed with the stock Hotend that comes with Bambu?
Me again... So are the nozzles different for the CHT than the GammaMaster versions? I see the GammaMaster nozzles sold separately but not the CHT.
Hello. I am skeptical about upgrading my X1C. I just got it and it is so easy to use and prints perfectly out of the box. That being said, I love to upgrade my stuff. If I put this hot end on, will the printer AUTOMATICALLY know about the improvements and adjust accordingly? Or is that something that I have to jack with the setting for?
Looks interesting, & I would love an reliable source. What are the differences from Bambu X1E Hot Ends? Why at $129.99 am I going to have to assemble this? Thanks
Hello is this 0.4mm or 0.6mm nozzle?
I'm not seeing what size nozzle(s) are included with this order or if its just the socketed assembly and you have to buy your FIN nozzle separately.
It comes with a 0.4 nozzle, the 0.6 and 0.8 are separate.
I'm not seeing the nozzles for sale. Are they different for the CHT or do they just use the GammaMaster nozzles as well?